Påkørselsbøjler
Impact protection hoops protect rack ends, machines, doors, pipework and building corners from collision damage caused by forklifts, pallet trucks and lorries, while marking hazard points clearly in yellow and black. This category offers steel impact protection hoops for warehouses, production and outdoor areas: galvanised hoops with Ø 76 mm tube in heights from 350 to 1,200 mm, double hoops with 400 mm depth, hoops with underrun protection and corner guards for corners exposed on several sides. Depending on the model, the hoops are bolted down or set in concrete. We supply commercial customers and public authorities only; prices are net.
Buying guide: impact protection hoops
Types at a glance
| Type | Typical use | Versions in our range |
|---|---|---|
| Single impact protection hoop | rack ends, machines, door frames | galvanised steel, Ø 76 mm, height 350 / 600 / 1,200 mm, width 375 / 750 / 1,000 mm |
| Double hoop | high-traffic areas, loading zones | width 750 or 1,000 mm, depth 400 mm, height 650 or 1,150 mm, bolt-down or set in concrete |
| Hoop with underrun protection | protection against low forks and pallets | height 650 mm, base plate 100 × 150 mm, bolt-down |
| Corner guard | building and rack corners | galvanised and powder-coated steel, Ø 76 mm, wall thickness 3.2 mm, height 350 / 600 / 1,200 mm |
Choosing height, width and underrun protection
The height depends on the vehicle: 350 mm is often sufficient for pallet trucks and order pickers, while 600 to 1,200 mm makes sense for forklifts and high loads. The width should cover the protected object at the sides. Where forks or pallets can slide underneath the hoop, choose a model with underrun protection or a double hoop.
Installation: bolt-down or set in concrete
Hoops with base plates are fixed to load-bearing concrete with heavy-duty anchors, which are available as accessories. Versions for setting in concrete are particularly suitable for outdoor areas and new buildings. Check the floor and any services in the ground before installation.
Regulations and marking
In Germany, hazard points in traffic areas are marked in yellow and black in accordance with ASR A1.3. For racking, DGUV Rule 108-007 requires collision protection at least 30 cm high at rack corners in aisles used by industrial trucks. The measures required in your company are determined by your risk assessment.
Material and finish
The galvanised steel impact protection hoops are designed for indoor and outdoor use. They are bent from a single tube and have no welds; the yellow coating with black warning stripes ensures good visibility.
Frequently asked questions
How high should an impact protection hoop be?
That depends on the vehicle and the object to be protected. For rack corners, DGUV Rule 108-007 specifies a minimum height of 30 cm; with forklift traffic, many companies choose 600 mm or more.
Are fixings included?
For most models, no. Floor anchors and fixing sets are available as accessories.
Can impact protection hoops be used outdoors?
Yes, the galvanised steel hoops are designed for indoor and outdoor use.
What does underrun protection do?
A second, lower crossbar prevents forks or pallets from passing under the hoop and hitting the protected object.
Do you supply larger quantities for projects?
Yes. For halls, warehouses and construction projects we prepare an individual net quotation for commercial customers.
More solutions: Impact protection & collision guards with bollards, column protection, rack protection and guard rails.
Kontakt os
Vi ser frem til din tekniske udfordring.
Lager & specialløsninger
Standardsortiment fra lager samt ordrebaseret specialfremstilling efter dine specifikationer.
Personlig faglig rådgivning
Direkte kontakt med vores eksperter – vi finder den tekniske løsning til dit problem.
Mærkekvalitet
Produkter fra anerkendte producenter – certifikater og overensstemmelseserklæringer pr. produkt på forespørgsel.
Levering DE & Norden
Pålidelig levering til Tyskland, Danmark, Norge, Sverige og Finland – Østrig og Schweiz på forespørgsel.