Paint Remover

Removal of Floor Markings

For the removal of larger floor marking areas – especially also for 2K floor markings – we also offer a professional removal service for old floor markings, if required also with simultaneous re-marking.

The surfaces are to be treated with a high-pressure cleaner after the paint remover has taken effect. The effectiveness depends on the substrate, number of paint layers, and type of paint (carry out a test beforehand if necessary).

•        Paint remover easily removes old paints and varnishes from almost any surface
•        Clean work without brushes
•        Contains no harmful solvents
•        Penetrates paint layers quickly and dissolves them effectively
•        Also removes multiple layers in one working step
•        Adheres to both horizontal and vertical surfaces
•        Can be applied on almost any surface
•        Optimal application temperature: +10 to +25°C
•        Dwell time ranges between 5 to 30 minutes

Application:

Before use, shake the paint remover can well for at least 1 minute
Hold the can vertically during use
Avoid working on surfaces exposed to direct sunlight or heat
Spray a thick and even layer on the surface to be treated from a distance of approx. 20 to 30 cm and allow it to take effect
Remove blistered or softened paint by scraping with a knife or spatula. Repeat the working step for difficult-to-remove paint layers
To prevent nozzle clogging, briefly spray the valve upside down after use
Then clean the surface with our fast-drying degreaser

After the paint remover has taken effect, surfaces may need to be reworked with a high-pressure cleaner. The effectiveness depends on the substrate, number of paint layers, and type of paint (carry out a test beforehand if necessary).

IMPORTANT!
Before first use, we recommend conducting a compatibility test with the surface to be treated.