Adhesive for Floor Indicator Pins

With the 2-component adhesive, steel pins of tactile ground indicators can be securely anchored in the ground German quality product - one cartridge with 250 ml is sufficient for approx. 250 drill holes / pins Processing the adhesiveThe special coaxial cartridge with the supplied static mixer can be processed using standard cartridge guns. Suitable pressure gun is also available here as an accessory. Discard the first 5-8 cm of the dosed bead. The adhesive application can be done one-sided. Technical data Base: 2-component hybrid polymerDensity: 1.4 g/cm³Viscosity: thixotropic pasteProcessing temperature: +5 to +35 °CPot life: (at +23 °C and 50% relative humidity): approx. 10 min.Loadable after: approx. 60 min.Volume change (DIN 52451): 1 %Maximum adhesive gap bridging: 10 mmShelf life (+5°C to +25°C / +41°F to +77°F): 12 monthsShore hardness A (DIN 53505 / ASTM D 2240): ± 5 40Elongation at break (DIN 53504 / ASTM D412): 350 %Tensile strength of pure adhesive and sealant: 2.2 N/mm²Average tensile-shear strength (DIN EN 1465 / ASTM D 1002): 1.3 N/mm²Building material class (DIN 4102): B 2

Aluminum Step Edge Markings

Anti-slip Aluminum Step Edge Markings optionally combined with Colored Plastic Material: Anodized and non-anodized aluminum Color variants offered for anodized aluminum Optionally additionally available are special colored safety PVC inserts available in three different slip resistance ratings: R10, R11, R12. Scratch-resistant and easy to clean.

Aluminum Trench Bridge

Pedestrian Bridge for Trenches at Construction Sites The decking of the pedestrian bridge for trenches is made of non-slip aluminum checker plate 3/4 mm including approach ramp, base frame, railing and decking made of aluminum, lateral protection of the foot space by aluminum side boards, the side railings are equipped with red-white-red reflector strips, carrying handles welded on both sides allow ergonomic carrying, four integrated stacking brackets ensure safe transport and proper storage, the bridges can be secured against slipping with the ground nail Art.-No. DD-SCHK-30W80 through four integrated eyelets, load capacity: 200 kg/m²

Aluminum White Cane

Long Cane or Also Blind Cane These canes are intended for the orientation and mobility of blind individuals. They are mostly referred to as“long canes” or sometimes as “blind canes.” How long should a long cane be? They extend vertically in front of the body from the ground up to the sternum, sometimes to the armpit, or in rare cases up to the shoulders, usually in lengths ranging from 110 to 150 cm.

Blind Cover for Barrier Gate Grilles

Protective Tactile Strip for Construction Sites Safety and accessibility on construction sites are of crucial importance, especially for people with visual impairments. To address this challenge, the innovative protective tactile strip with acoustic feedback has been developed. Find here an information brochure from the German Association of the Blind and Visually Impaired (DBSV) on the topic "Securing construction sites … also for blind and visually impaired road users."

Bus Stop Curb

Accessible bus stop kerbs / kerbs for bus stops and tram stops Features and benefits of barrier-free bus kerbs Accessibility and safety : The special shape of the bus stop curbs ensures a barrier-free transition from the sidewalk to the bus and/or tram . This is achieved through a precisely calibrated height and a special surface design that offers high slip resistance. These safety features are essential to prevent falls and increase comfort for all passengers. Robustness and durability : Made from high-quality materials, these kerbstones are characterized by their extreme resistance to mechanical stress, temperature fluctuations, and chemical influences such as de-icing salts. They meet the requirements of DIN standards, ensuring high quality and durability. The surfaces are specially treated to minimize wear and guarantee a long service life. Flexibility and adaptability : Bus stop curbs are available in various heights and lengths to meet the specific requirements of different bus stops. The zero-level crossing allows for barrier-free access and makes orientation easier for people with visual or motor impairments. Application examples Urban spaces : In urban areas with high foot traffic, bus kerbs are essential. They ensure smooth boarding and alighting and help reduce dwell times. For example, in a busy city center, the use of bus kerbs with a height of 18 cm creates a virtually gapless connection between the bus and the curb, which significantly facilitates boarding with wheelchairs and strollers. Airports and train stations : At transport hubs such as airports and train stations, bus kerbs offer an effective solution for rapid passenger exchange. The integration of tactile paving systems helps visually impaired people move around safely. For example, at a large train station with multiple bus lines, the kerbs are equipped with special warning surfaces that indicate hazards such as stairs or edges. Rural areas : Even in less densely populated areas, bus stop curbs contribute to increased mobility. Here, lower curbs are often used, specifically adapted to the needs of the elderly and children. For example, in a rural community, a 12 cm high curb is used to allow safe crossing of the road where there is otherwise no sidewalk. Special features : Bus stop curbs are particularly important near hospitals and nursing homes to facilitate access to medical facilities. For example, a bus stop in front of a nursing home was equipped with curbs featuring a non-slip surface and a special signal color to increase visibility and safety. Why should bus stop curbs and crossing curbs be used? Concrete bus stop and pedestrian crossing kerbs are an essential element of modern transport infrastructure, improving accessibility and safety while also contributing to the efficiency of public transport. Their versatility and numerous available variations offer a flexible solution that meets individual needs and requirements. In this way, they make a significant contribution to creating an inclusive and barrier-free environment where everyone can participate equally in public life. Submit a request

Cleanroom Entrance Mats with Tactile Blind Guidance System

Tactile dirt-trapping mats with integrated guidance system for the visually impaired These tactile dirt-trapping mats with an integrated guidance system for the visually impaired offer barrier-free orientation and are ideal for high-traffic entrance areas. The mat combines functionality and safety thanks to its robust and weather-resistant construction. Here are some technical details: Profile types : Available in variants with a mat height of 12 mm, 17 mm or 22 mm (with a corresponding frame height of 15, 20 and 25 mm), each with brush and plastic profile. Material : High-quality aluminum profiles combined with durable inserts. Areas of application : Suitable for indoor and outdoor use. Load capacity : Suitable for wheelchairs, luggage trolleys and shopping carts. Optionally also available as a photoluminescent escape route marker in the dark (e.g. in the event of a power outage) Special features : Rust-free and sustainably produced. %20mit% paving for the visually impaired. Request a quote.

Composite Material White Cane

Long Cane or Also Cane for the Blind Made of Composite Material These canes are intended for the orientation and mobility of the visually impaired. They are mostly referred to as“long canes” or sometimes as “cane for the blind.” How Long Should a Blind Cane Be? They extend vertically in front of the body from the ground up to the breastbone, sometimes up to the armpit, or in rare cases up to the shoulders, usually in lengths from 110 to 150 cm.

Custom-Made Wheelchair Ramp

Custom-made wheelchair ramp Make your entrance or stairs accessible with our large, custom-made wheelchair ramps . Contact us today for a personalized consultation and a free, no-obligation quote! Due to their size and length, our ramps can also overcome stairs with many steps (e.g., 5, 6, 7, 8 or more) and significant differences in height. Advantages of our custom-made wheelchair ramps: Individual customization : Each ramp is manufactured according to the exact dimensions and requirements of your installation site. Maximum safety : Non-slip surfaces and robust materials guarantee safe use in every situation. Easy installation : Our ramps can be installed quickly and easily, so you can immediately benefit from the new accessibility. Durability : Thanks to weather-resistant materials, our ramps are particularly durable and easy to maintain. %20Ma% C3%9F" class="btn btn-default">Submit a request

Dimple Sheets

Studded panels for tactile guidance systems, e.g. for bus stops according to DIN 32984 Size: 30 cm x 30 cm Available panel thicknesses: 50 mm, 80 mm and 100 mm Available colors: White (as well as yellow, anthracite, black and other colors available on request) Shaped according to DIN 32984 and featuring a truncated cone and surface structure, these studded concrete slabs are ideal for tactile guidance systems in public places such as train stations, bus stops, etc. They are made of high-performance concrete for pedestrian-friendly use. Shaped according to DIN 32984 Number of studs (depending on the variant): 32, 36, 50 Dimensional accuracy according to DIN 18500 Frost and de-icing salt resistance according to DIN EN 1338 / 1339 Surface structure: truncated cone (with knurled structure), spherical segments Tactile paving slabs with white concrete studs for the blind "The local public transport plan must take into account the needs of people with reduced mobility or sensory impairments with the aim of achieving full accessibility for the use of local public transport by 1 January 2022" ( §8 para. 3 Passenger Transport Act (PBefG) ) Matching "smooth" concrete slabs for accompanying strips in anthracite as a contrasting color in 300 x 300 x 80 mm (LxWxH) are available. Please note that tactile floor markings made of slabs for the blind can pose a tripping/accident hazard (including for pedestrians, cyclists, inline skaters and wheelchair users), especially on cycle paths and stair areas. Offer available upon request

Foldable Aluminum Support Pole

The support cane for visually impaired individuals is not intended for orientation purposes. However, its white color signals to others that the person is visually impaired.

Portable Ramp

Two sizes of the mobile ramps are offered: Small: 1.6 m x 0.8 m x 0.15 m (Weight: 38 kg) Large: 1.6 m x 2.5 m x 0.15 m (Weight: 108 kg)

Ribbed Plates

Tactile paving slabs with ribs made of concrete Shaped according to DIN 32984, these ribbed concrete slabs are ideal for tactile guidance systems for the blind in public places such as train stations, bus stops, etc. They are made of high-performance concrete for pedestrian-friendly use. Shaped according to DIN 32984 Dimensional accuracy according to DIN 18500 Frost and de-icing salt resistance according to DIN EN 1338 / 1339 Surface texture: For increased Longitudinal grip is achieved through transverse ribbing. This results in a surface grip rating of > 55 SRT or a slip resistance rating of R12. Groove widths are 14 mm (standard), 20 mm, 25 mm, 30 mm, 42 mm, and 50 mm. "The local public transport plan must take into account the needs of people with reduced mobility or sensory impairments with the aim of achieving full accessibility for the use of local public transport by 1 January 2022" ( §8 para. 3 Passenger Transport Act (PBefG) ) Matching "smooth" concrete slabs for accompanying strips in anthracite as a contrasting color in 300 x 300 x 80 mm (LxWxH) are available. Please note that tactile floor markings made of slabs for the blind can pose a tripping/accident hazard (including for pedestrians, cyclists, inline skaters and wheelchair users), especially on cycle paths and stair areas. %20aus% " class="btn btn-default">Submit an inquiry

Rubber Curb Ramp

Curb Ramp Made of Rubber for Sidewalks and StepsMaterial: Durable Hard RubberNet Weight:Variant 1: 11 kgVariant 2: 20 kgLength:Variant 1 & 2: 600 mmWidth:Variant 1: 300 mmVariant 2: 360 mmHeight:Variant 1: 100 mmVariant 2: 150 mmColor: Black with Yellow ReflectorsMounting: Mounting material can be ordered separately as FS-FIX

Separation Strips for Bicycle Paths

Tactile cycle path slabs made of concrete Tactile concrete cycle path slabs set new standards in accessible transport planning. They serve as separating strips between cycle paths and footpaths , ensure clear orientation and increase safety on transport routes. The tactile surface offers optimal feel and signals changes of direction, transitions, or hazards. Made of robust concrete, these slabs are weather-resistant and durable. They can be easily integrated into existing infrastructure and are available in various sizes and colors. Perfect for sustainable mobility concepts in urban and rural areas! The cycle path slabs serve as ground indicators for demarcating level traffic areas in public traffic areas according to the recommendation of the DBSV, in accordance with DIN TS 15 209, DIN 32 984 and Ril 813.02. The upper surface has usable areas with an asymmetrical height profile, while the sidewalk side has a ribbed structure. Material: Fiber-reinforced concrete C45/55 XF4 (abrasion class 4, tested according to DIN 52108) on core concrete C30/37 XF2, frost and de-icing salt resistant Lay the top edge of the slab flush with the adjacent floor covering, with joints > 3 mm, in a professional manner. Length x Width: 745 x 300 mm Height: 80 - 105 mm Available colors: White, Yellow, Anthracite or Concrete Grey %20aus% Request a quote. Accessible, rollable concrete curb ramps Whether used as visual markers on sidewalks and bike paths or as step-free ramps in public spaces, these elements optimize orientation and comfort for all users. Through innovative designs that combine durability and ease of maintenance, dividing strips and ramps contribute significantly to sustainable and safe traffic design. The rollable curb or zero-level curb offers an innovative, barrier-free solution for step-free transitions between traffic areas. With a curb height of just 3 cm, it allows for effortless rollover, providing maximum comfort, especially for wheelchair users, walker users, and other people with reduced mobility. Lowering the crossing area to road level creates a seamless transition that is supported both visually and tactilely. An integrated barrier with a ribbed structure provides additional safety in the zero-level area, ensuring optimal guidance for blind and visually impaired people. This concept is complemented by matching transition stones that guarantee a harmonious connection to adjacent areas, thus contributing to a safe and inclusive traffic space. Please contact us for further information.

Step Edge Marker Plastic

Colored Step Edge Marking The colored step edge markings are not specifically tactile but serve to visually highlight the stair edges, especially for visually impaired persons. Material: Polyurethane (PU) Variants: Self-adhesive, without adhesive Length: 1000 mm Width: 40 mm Height: 35 mm The following color tones are offered: Yellow / Signal Yellow RAL 1003 Ivory RAL 1014 Red / Signal Red RAL 3001 Blue / Signal Blue RAL 5005 Gray / Signal Gray RAL 7004 Dark Gray / Slate Gray RAL 7015 Light Gray / Light Gray RAL 7035 White / Signal White RAL 9003 Black / Signal Black RAL 9004

Studded Steel Anti-Slip (100 Pieces)

Material: Stainless Steel 316 L Delivery time: 2-4 weeks Please note that tactile floor markings may pose a tripping/accident hazard (including for pedestrians, cyclists, inline skaters, and wheelchair users), especially on cycle paths and step areas.

Tactile Blind Guidance System for Screwing

Tactile Blind Marking

Self-adhesive Floor Marking as a Guidance System for Blind and Visually Impaired Persons for Indoor and Outdoor Use Guidance system for the blind with tactile floor marking for blind and visually impaired people usable on asphalt and concrete paving both indoors and outdoors (for outdoor use, only with Primer 5). The self-adhesive floor marking for the blind provides spatial orientation for visually impaired persons in the workplace as well as optical and tactile distinction compared to conventional floor marking tapes. Quick to install and wear-resistant (suitable up to maximum use by pallet trucks / pedestrians). Available widths: 30 mm, 50 mm, 75 mm and 100 mmLength: 12.5 mThickness: 2.6 mmColors: White and Yellow Enables orientation for visually impaired and blind persons. Textured and slip-resistant surface, even when wet. Suitable for rough and uneven surfaces. (See Wikipedia entry: Blindenleitsystem) The self-adhesive blind marking does not comply with DIN 32984.

Tactile Dots (Pack of 100)

Mounting templates for the installation of tactile floor indicators available as an accessory on request. Consumption per 30 x 30 cm when using 30 mm studs with diagonal installation: 50 studs Available colors Yellow / Signal Yellow RAL 1003 Red / Signal Red RAL 3001 Blue / Signal Blue RAL 5005 Gray / Signal Gray RAL 7004 Dark Gray / Slate Gray RAL 7015 Light Gray / Light Gray RAL 7035 White / Signal White RAL 9003 Black / Signal Black RAL 9004 Material: Polyurethane (PU)Flame retardant (Bfl-s1 according to EN ISO 9239-1)Slip-resistant (R11) Delivery time: 2-4 weeks Please note that tactile floor markings may pose a tripping/accident hazard (including for pedestrians, cyclists, inline skaters, and wheelchair users), especially on bicycle paths and stair areas.

Tactile Floor Guidance System Ribs (Plastic)

Tactile Ribs as Floor Indicators for Floor Guidance Systems Made of Colored Plastic and Self-Adhesive Available Versions of tactile plastic ribs: Self-adhesive, without adhesive, with pins For the self-adhesive variant, there are different adhesives depending on the application / substrate. Ribs "without adhesive" can be glued during installation with a liquid adhesive adapted to the substrate. Tactile ribs with pins are installed by drilling holes into the floor and then bonding them with polyester resin. This installation method is particularly recommended for outdoor use, uneven substrates, or high loads. Installation templates for floor indicators available as accessories. Tactile ribs in widths of 10 mm (recommended for indoor use), 15 mm (recommended for outdoor use), 25 mm and 35 mm, each with a length of 295 mm Available heights: 3.3 mm (indoor) and 5 mm (outdoor, as more perceptible) Please note that tactile floor markings can pose a tripping/accident hazard (among others for pedestrians, cyclists, inline skaters, roller skaters, and wheelchair users), especially on bike paths, stair areas, and with longitudinal grooves. Furthermore, the ribs do not fully comply with DIN 32984: 2020-12. Standard Colors: Yellow / Traffic Yellow RAL 1003 Ivory RAL 1014 Red / Signal Red RAL 3001 Blue / Signal Blue RAL 5005 Gray / Signal Gray RAL 7004 Dark Gray / Slate Gray RAL 7015 Light Gray / Light Gray RAL 7035 Black / Signal Black RAL 9004 Other colors / special colors and transparent elements available on request. For visually impaired persons, a strong color contrast to the substrate is especially important. Offered surfaces: smooth, with parallel lines, with studs (especially recommended for outdoor use) Material: Polyurethane (PU) Flame retardant (Bfl-s1 according to EN ISO 9239-1)Slip resistant (R11)

Tactile Ground Indicators (Plastic)

Tactile Floor Indicators as Guideline System Made of Colored Plastic and Self-Adhesive Offered versions of the tactile plastic studs: Self-adhesive, without adhesive, with pin For the self-adhesive version, there are different adhesives depending on the application / substrate. Studs "without adhesive" can be glued during installation with a liquid adhesive adapted to the substrate. Tactile studs with pins are installed by drilling holes into the floor and then glued with polyester resin. This installation method is especially recommended for outdoor areas, uneven substrates, or high stress loads. Installation templates for floor indicators available as accessories. Tactile studs with diameters 25 mm, 30 mm, 35 mm Available heights: 3.3 mm, 5 mm (5 mm is recommended as it is better perceptible, especially outdoors) Consumption per 30 x 30 cm when using 30 mm studs with orthogonal layout: 36 studs, diagonal layout: 50 studs For the number of studs per attention field and color selection, the following standards must especially be observed: DIN 32984:2020-12: Floor indicators in public spaces DIN 18040-3: Barrier-free construction in public traffic and open spaces DIN 32975 - Contrasts in public spaces H BVA (FGSV guidelines for barrier-free traffic facilities) Standard colors: Yellow / Signal yellow RAL 1003 Ivory RAL 1014 Red / Signal red RAL 3001 Blue / Signal blue RAL 5005 Gray / Signal gray RAL 7004 Dark gray / Slate gray RAL 7015 Light gray / Light gray RAL 7035 Black / Signal black RAL 9004 Other colors / special colors and transparent elements available on request. For visually impaired people, a strong color contrast to the substrate is particularly important. Offered shapes / surfaces: Flat truncated cone, truncated cone with lines, truncated cone with studs (especially recommended for outdoor use), dome shape Material: Polyurethane (PU) Flame retardant (Bfl-s1 according to EN ISO 9239-1)Slip-resistant (R11) For more information on the proper design of tactile guidance systems: Guideline for practical application of DIN 32984. Please note that a new version of the DIN regulation has been available since December 2020.

Tactile Guidance System

Tactile Guidance System Made of Metal for Indoor and Outdoor Use or Public Areas with Sophisticated Design Tactile Ribs are offered in the following lengths: 280 mm Widths: 17 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm Heights: 3 mm, 4 mm, 5 mm Materials: Aluminum, stainless steel, brass and bronze

Tactile Guidance System Rental

We offer rental only without installation. Tactile guidance systems for the blind are an important aid for blind and visually impaired people to move safely and independently in public spaces. These guidance systems consist of special floor indicators (ribbed and studded), which are tactilely perceptible due to their texture and provide orientation to users. Through color contrast, they also assist visually impaired people with orientation. If you are planning an event or occasion where blind or visually impaired persons will be present, you should definitely consider renting a tactile guidance system for the blind. The cost of renting a tactile guidance system for the blind depends on various factors, such as the size of the area to be secured, the number of floor indicators required, and the rental duration. We will gladly prepare an individual offer for you. Conclusion: Anyone planning an accessible event should definitely also consider blind and visually impaired guests and rent a tactile guidance system for the blind. It is advisable to contact specialized providers and ensure that the guidance systems comply with applicable standards and norms. Note: Please be aware that tactile floor markings can pose a tripping or accident hazard (also for pedestrians, cyclists, inline skaters, roller skaters, and wheelchair users), especially on cycle paths, in stair areas, or with longitudinal grooves. The offered guidance system for the blind may differ in some points from DIN 32984:2020-12, for example in height, rib width/number, spacing, and luminance contrast.