Acoustic Insulation Mat

Acoustic insulation material This special product is used, among other things, for insulating power plants. Properties of the acoustic insulation material: High temperature resistance High tensile strength and elasticity Resistance to chemicals Good vibration resistance Very good acoustic properties Examples of applications for the acoustic insulation mat: Thermal and acoustic insulation Exhaust duct linings for gas turbines Silencer insulation Typical applications - High-temperature linings of furnaces and combustion chambers - Rigid high-temperature gaskets and seals - Heat shields - Combustion chamber linings of gas boilers Available roll size: 1) Thickness: 38 mm in 5 m length and 610 mm width 2) Thickness: 50 mm in length 3.66 m and width 610 mm This particular material is only available as a full truckload (=440 rolls), however smaller quantities of comparable/similar products are also available on pallets.

Acoustic Protection Chequered Plates

Noise Protection for e.g. Loading Ramps Various slip-resistant solutions for noise protection for loading ramps, transport routes, etc. are offered.   

Anti-Vibration Pads for Transformers

Vibration damping plates for transformers Vibration damping plates are available in various hardness grades and are designed for the specific frequency of the transformer. The plates are placed under the transformer's rollers and absorb vibrations before they can be transmitted to the ground. Made of nitrile rubber, the plates are resistant to almost all types of oil, including transformer oil . They are a cost-effective solution for reducing vibrations in transformer substations. Transformers can radiate vibrations through their metal casings, which are transmitted to the immediate surroundings. These vibrations can lead to an increase in noise pollution, which in turn can cause disturbances in the environment. Our anti-vibration pads can reduce this disturbance. Our anti-vibration systems are available in various degrees of hardness, each with specific frequencies and absorption capacities. Two specific hardness grades are particularly suitable for insulating the safety container from the ground and for insulating the wheels of transformers that are installed on beams or on the floor of our containers. The plates, made from nitrile rubber, are resistant to almost all oils used in the transformer industry. Note: The anti-vibration plates supplied may differ from the image shown. This does not affect their function.

Best Soundproofing Mat

Weatherproof soundproofing mat for outdoor use According to the noise protection report, this soundproofing mat has a sound insulation rating of 23 dB . To our knowledge, this weatherproof soundproofing mat for outdoor use has the best sound insulation rating on the market. Maximum peace and quiet in your outdoor area with our premium soundproofing mat. Experience the perfect combination of noise reduction and weather resistance with our high-quality, weatherproof soundproofing mat for outdoor use. Whether you want to reduce unwanted traffic noise, noisy neighbors, or construction noise – our soundproofing mat offers the ideal solution for your home or business. Superior sound insulation: 23 dB noise reduction With an impressive sound insulation rating of 23 dB, confirmed by an independent noise protection report, our soundproofing mat sets new standards in the market. Weatherproof and durable Our soundproofing mat was specially developed for outdoor use. It withstands extreme weather conditions such as rain, snow, wind, and UV radiation without losing its sound absorption capacity. This ensures you can enjoy a quiet environment for years to come. Versatile applications Thanks to its robust design and excellent sound insulation, our weatherproof soundproofing mat is suitable for numerous applications: Garden and terrace partition Noise barriers for construction sites Soundproofing for industrial plants Creating quiet zones in urban environments Custom-made soundproofing mat We would be happy to offer you this excellent soundproofing mat made to measure . %C3% 9F.jpg" alt="Custom soundproofing mat before" width="240" height="320" /> %C3% 9F.jpg" alt="Custom-made soundproofing mat" width="240" height="320" /> Easy installation Installing our soundproofing mat is quick and easy. Using the included UV-resistant cable ties, the mat can be attached to fences, walls, or special frames, allowing you to benefit from immediate noise reduction. Pay particular attention to structural stability, as strong wind loads can occur! Conclusion: Invest in peace and quiet and quality of life and buy the soundproofing mat today. Say goodbye to disruptive noise and enjoy a quieter, more pleasant environment. Our weatherproof outdoor soundproofing mat is the best choice for effectively reducing noise. Buy this excellent soundproofing mat, made in Europe, today. %20best% 20soundproofing mat%205.0" class="btn btn-default">Request a quote

Capsule Ear Protection

Earmuffs: Comfortable professional hearing protection for demanding environments with a noise reduction rating of 36 dB according to EN 352-1:2002 The special adjustable cups with a dual-pin system allow for a precise fit, ensuring a perfect seal and maximum attenuation. With an attenuation rating of up to 36 dB according to EN 352-1:2002, this hearing protection is ideal for use in noisy work environments without completely isolating the wearer. Reflective details further enhance the wearer's visibility and safety in dark or poorly lit environments. %C3% are CE and UKCA certified, confirming their compliance with the highest safety standards. These certifications ensure that the earmuffs are not only reliable but have also been tested and certified by independent bodies. In summary, high-performance earmuffs offer an excellent combination of protection, comfort, and adjustability, making them an ideal choice for both professional and private users. Whether on construction sites, in industrial environments, or during noisy leisure activities, these earmuffs reliably protect your hearing and contribute to maintaining your health. %20Capsule case% C3%B6r protection" class="btn btn-default">Submit a request

Compact Soundproofing Mats

Compact Soundproof Mats 4.0: Effective, Weatherproof Noise Protection in a Handy Form with 20 dB Sound Insulation For standard construction fences, you need three compact soundproof mats per fence. These can be easily attached using cable ties. Our compact soundproof mats offer a practical solution for effective noise reduction in a compact form. Ideal for construction sites, outdoor events, or other areas where a quiet environment is required. Thanks to their innovative design and high-quality materials, our soundproof mats provide outstanding sound insulation while being lightweight and easy to handle. With a compact size, they fit effortlessly into any application area and can be installed with ease. Made from robust PVC and polyester wadding, our soundproof mats are weatherproof and withstand the elements. They offer not only effective noise reduction but also a long service life. Invest in the Compact Soundproof Mats and create a pleasant and quiet working environment or outdoor event space. Our products are designed to effectively meet your noise protection needs while offering comfort and convenience.

Construction Fence Noise Barrier

Noise protection suitable for all standard construction fences Noise protection for construction fences can be bought or rented from us. Height: 2050 mm Width: 3550 mm (Special sizes available upon request.) The noise barrier for construction fences is easy to transport, suitable for multiple uses, and can be easily attached to construction fences with cable ties. We recommend conducting a wind calculation before installation and equipping the construction fence with appropriate accessories (concrete bases, support struts) to ensure good stability. Features of the noise protection suitable for standard construction fences: Material: PVC tarpaulin, PVC mesh and polyester wadding Noise absorption : Up to 60% Sound reduction : EN ISO 717/1, up to 30 dB Weight : approx. 10 kg Quick installation : Assembly in 5 minutes Reusable and durable : UV-resistant, weatherproof (rain and frost resistant) Versatile : Adaptable to all structures Customizable : Color selection in black (standard), blue, green, grey and beige, or logo printing possible. %20f% C3 %BCr% 20Bauz %C3% A4une %20Farbauswahl% 20in%20Schwarz,%20Blau, %20Gr% C3%BCn, %20Grau% 20und%20Beige.png" alt="Noise protection for construction fences in black, blue, green, gray and beige or have your logo printed" width="400" height="67" /> Performance values of the noise reduction mats: Reduction : EN ISO 717/1, R'W(C,Ctr): 16 dB (-1,-4) Absorption coefficient : EN ISO 11654, αw: 0.4 We also offer acoustic tarpaulins for noise protection on scaffolding .

Construction Site Enclosures

Construction Site Enclosures for Demolition, Also for Protection Against Weather Influences and Construction Dust Enclosures made of acoustic tarpaulins are an efficient way to reduce construction site noise and construction dust during demolition. These can be realized either as sound-insulating walls or ceilings made of tarpaulins. Typical noise sources on construction sites include, for example, pneumatic hammers, concrete mixers, saws, trench cutters, demolition equipment, earthmoving machines, flat excavators, wheel loaders, scrapers, graders, excavators, pile drivers, soil compactors, vibratory rollers, internal vibrators, vibrator plates, tamping rammers, compactors, compressed air hammers, demolition hammers, hoisting equipment, construction cranes, circular saws, plastering machines, percussion drilling machines, drillers, and traffic from trucks as well as other construction machinery. These can be set up either as sound-insulating walls or ceilings made of tarpaulins. Areas of application include, for example, construction sites near hospitals, data centers, clean rooms, as well as nighttime construction and demolition work in urban areas or demolition sites. There are also enclosures for protection against weather effects and construction dust, e.g., for excavations. The noise protection tarpaulins can also be customized, e.g., printed as advertising media.

Construction Site Noise Protection Wall Rental

Rent tall, mobile noise protection walls for your construction site with heights of 4 m or 6 m If your construction project exceeds the usual noise protection requirements and the conventional noise protection mats for construction fences with a height of 2 m are no longer sufficient, we offer the ideal solution: our high-quality, mobile noise protection walls for rent with impressive heights of 4 m or 6 m. Noise assessments can reveal situations where standard noise protection is not adequate. In such cases, taller soundproof walls are often necessary to meet stricter requirements for construction noise. Our solution enables the installation of these higher noise protection walls while ensuring stability and safety – even under adverse weather conditions such as storms. Our comprehensive offer includes the rental of the tall noise protection walls including the required robust construction and support scaffolding. We provide you with a coordinated all-in-one package that includes assembly, so you don’t have to worry about anything else. Trust our expertise and the quality of our noise protection solutions to shield your construction site from annoying noise pollution. Contact us today to learn more about our flexible rental options for tall, mobile noise protection walls and to effectively support your construction project. Submit inquiry

Container Noise Protection

Advantages of our noise protection solutions for containers Efficient noise reduction: Ideal for noisy environments. Individual customization: Tailor-made solutions for containers of any size, including practical features such as eyelets, magnetic connections and Velcro straps. Robust materials: Weather-resistant and durable construction, suitable for outdoor use. Quick assembly: Easy to install with steel cables and hooks (not included). Optional branding: Integration of your logo for a professional and personalized look. Areas of application: Construction sites: Reduce machine noise and create a more pleasant environment for residents and employees. Industry: Noise protection for production facilities or storage containers. Events: Prevent noise pollution during temporary installations. Alternatively, we also offer complete soundproof containers, e.g. for generators, in 20, 30 or 40 feet or custom-made . Noise barriers made from containers Our container-based noise barriers, combined with our sound-absorbing noise protection mats for containers, offer an effective solution for reducing noise pollution on construction sites, at large events, and in industrial areas. The flexible stackability of the containers allows the height and length of the barrier to be individually adjusted to meet the specific requirements of your project. "A construction company should select a container company whose personnel are experienced in assessing the risks of a construction site. It is advisable to create an emissions plan before construction begins to avoid additional costs and delays. Shipping containers absorb noise and ensure quick and easy assembly: it takes about a week to deliver and assemble approximately 100 containers. Such a container wall offers a length of 400 m and a height of 8 m – with a base area of 400 x 3 m. Vertically and horizontally installed bridge fittings or twist logs hold the containers together. The containers also reliably catch falling stones, for example. The container company should consider wind loads before and during assembly and, if necessary, gravel and compact the ground. All containers are ballasted in the lower layer according to the specifications of a structural engineer." ( Source: Construction Industry: Noise Barriers Made of Shipping Containers ) Since containers can be stacked up to six high, the barrier wall can be flexibly designed in terms of height and length. Why choose us? We offer not only effective noise control solutions, but also customized solutions. Rely on our expertise to reduce noise emissions and comply with legal requirements. Invest in high-quality noise protection for containers and ensure a quieter, more efficient working environment. 👉 %A4rmschutz% 20f %C3% BCr%20Container">Request a quote now, no obligation!

Custom Acoustic Insulation Element

Custom-made soundproofing elements / soundproofing panels for interior use Panel thicknesses: 60, 80, 100, 120, 150 mm Panel width: 1130 mm Panel length: On request High sound absorption properties Rated sound insulation rating up to Rw 43 possible Low weight, lightweight substructure, quick assembly Outer shell smooth, inner shell DU/RSL 9002, 15 μ (standard) For use in rooms with low and high humidity High density of the mineral wool used, min. 100 kg/m³ Certified fire resistance up to 240 minutes possible, fire protection class of the panels: A2-s1, d0 particularly good acoustic properties Further information about the download is below.

Elastic Industrial Flooring

Industrial flooring particularly well suited for renovation Due to its high adhesion, this special industrial flooring with bitumen also adheres to old and problematic substrates. This makes it the ideal solution in the renovation sector. Additionally, this flooring is easy to repair and is applied cold.

Fixed Soundproof Wall

Stationary Indoor Soundproof Wall Elements: Non-combustible with Excellent Sound Absorption External dimensions (width x height): 200 cm x 200 cm, 200 x 230 cm, 250 cm x 250 cm, 300 x 230 cm (=standard size) or 300 cm x 250 cm, other sizes available on request (maximum possible height of 270 cm / 2.7 m and a maximum possible length of 400 cm / 4 m) With a construction height of 230 cm, exactly two noise protection panels fit stacked one above the other at the same height, which looks visually more pleasing. The mobile soundproof walls are optimized for placement in a row – if you plan a corner setup, please contact us as the wheels will be arranged differently during production. Special sizes on request Color: Powder-coated in gray-white (=RAL 9002, wide color range available on request) The fixed soundproof walls are designed for indoor installation in a hall / industrial environment or alternatively in an office. Freestanding walls for shielding workstations, reducing noise at noise sources, and improving permanent noise sources. The element has a non-combustible insulation core as well as a special acoustic perforation and is intended exclusively for indoor use. Material: Biosoluble stone wool board with fire classification A2, "non-combustible",despite perforated surface design, high rigidity is ensured,factory-installed sealing tape.Panel thickness: 60 mm, 80 mm or 100 mm > Rated sound insulation value: 30, 34 or 36 dB (up to 43 dB maximum available on request), one-sided sound absorbingFire classification: A2 according to DIN 4102 Suitable screws for floor fixation are included in the scope of delivery. Alternative M10 heavy-duty anchors are not included. Assembly: Soundproof wall is delivered fully assembled on pallets. Delivery time: approx. 3-8 weeks (please inquire about the currently valid delivery time from us) Find here a mobile version of the soundproof wall for industry on lockable wheels.

Gabions

Gabion Stones as Soundproofing Walls With their exceptional stability, geometry, and versatility, gabions offer an ideal way to enhance acoustic comfort in your garden, on your property, or in public spaces such as industrial plants or sports facilities. The Strength of Gabions as Noise Barriers Gabions provide a robust stone enclosure with a remarkable ability to maintain balance on uneven terrain. Their simple construction and high durability make them a cost-effective and long-term solution for noise protection. Additionally, gabions often highlight the unique character of the property and blend seamlessly into the surroundings. The dimensions you specify for rectangular gabions without lids are extremely versatile and offer a wide range of design possibilities. Here are the specific dimension ranges: Height: The height can vary from a minimum of 10 cm up to an impressive 9 meters. Length: The length can range from 10 cm to a generous 10 meters. Width: The width can range from 20 cm up to 10 meters, allowing a wide selection of configurations. These flexible dimensions open up a broad spectrum of design options and enable you to perfectly tailor gabions to the specific requirements of your project. Whether for small decorative elements or extensive noise barriers, with these variable dimensions you can find a solution that fits your needs precisely. Why Choose Gabion Walls for Noise Protection? Quick Installation: Gabions can be installed quickly and easily, saving time and costs. Durable Reliability: With their high-quality construction, gabions remain reliable for years and require minimal maintenance. Versatile Application: From private fruit and flower gardens to public spaces such as industrial facilities and sports venues – gabions are effective wherever noise protection is needed. Environmentally Friendly: Gabions are made from environmentally friendly materials and provide an ideal habitat for climbing plants, which not only produce oxygen but also help reduce noise and promote biodiversity. Individual Customization Options: The height and length of gabions can be easily adjusted to meet the specific requirements of your project. We offer tailor-made noise protection solutions for your individual needs. Contact us today to learn more about the versatile applications of gabions as noise barriers and to realize your project. With gabions as noise barriers, you create not only a quieter environment but also an aesthetically pleasing and sustainable solution for your outdoor area.

Industrial Soundproofing Wall

Mobile, non-combustible sound protection wall for industry with premium sound absorption The mobile sound protection walls are designed for indoor installation in a hall. Besides in industry, the non-combustible, mobile, sound-absorbing walls can also be used in workshops and laboratories. External dimensions (width x height): 200 cm x 200 cm, 200 x 230 cm, 250 cm x 250 cm, 300 x 230 cm (=standard size) or 300 cm x 250 cm, other sizes made to measure on request (maximum possible height of 270 cm / 2.7 m and a maximum possible length of 400 cm / 4 m) With a construction height of 230 cm exactly two sound protection panels fit stacked at the same height, which looks more aesthetically pleasing. The mobile sound protection walls are optimized for installation in a row - if you plan an "around the corner" installation (L-shape or U-shape), please contact us, as the wheels are arranged differently in production in this case. Color: powder-coated in gray-white (=RAL 9002, wide color spectrum available on request) Mobile sound protection wall: Flexible noise protection for your operation Why choose mobile sound protection walls? In dynamic work environments where noise-intensive or protected areas are not permanently fixed in one place, flexibility is essential. Our mobile sound protection wall on castors provides a versatile solution to interrupt the direct sound field and flexibly shield workplaces. Discover how it can contribute to improving the acoustic environment in your company. Application areas for mobile sound protection walls Whether it is about shielding noisy machines and workplaces, noise protection at events, or separating noisy areas in industry, workshops, or laboratories – our mobile sound protection walls offer versatile protection for a wide range of requirements. Minimal ground clearance Thanks to a special construction, our mobile sound protection walls allow minimal ground clearance, ensuring effective sound insulation and effectively reducing noise. Maximum maneuvering comfort With smooth-running swivel castors and a parking brake, our mobile sound protection walls offer maximum maneuvering comfort and can be moved effortlessly even in confined spaces. Custom sizes on request The mobile sound protection walls are designed for indoor installation in a hall. Freestanding walls on castors to shield workplaces, minimize noise at noise sources, and improve temporary noise sources. The element has a non-combustible insulation core as well as a special acoustic perforation and is intended for indoor use. Material: Bio-soluble stone wool panel with fire rating A2, "non-combustible",despite perforated surface design, high rigidity ensured,factory-installed sealing tape.Panel thickness: 60 mm with rated sound insulation value 30 dB Fire classification: A2 according to DIN 4102Further product features/variants:– One-sided absorbing (optional double-sided on request)– Trolley with 4 braked castors– Trolley usable for different wall sizes- Optional also available as ESD-protected sound protection wall Assembly: Mobile sound protection wall is delivered fully assembled on pallets.On site, only the trolleys need to be mounted by the customer. Delivery time: approx. 3-6 weeks (please inquire about currently valid delivery times) If you do not need a mobile sound protection wall with wheels, there is a stationary variant of the sound protection wall for bolting down. For outdoor use, we offer sound protection mats for construction fences as temporary sound protection walls. Frequently Asked Questions about Sound Protection Walls for Industry What is a sound protection wall? A sound protection wall is a structural barrier designed to absorb, reflect, or isolate sound waves in order to reduce or control noise transmission. What types of sound protection walls are there? There are various types of sound protection walls, including mobile sound protection walls, stationary sound protection walls, sound protection walls for indoor and outdoor use, as well as temporary sound protection walls for construction sites or events. What are the advantages of a mobile sound protection wall? Mobile sound protection walls offer flexibility and can be moved and used at different locations as needed. They are ideal for temporary situations or changing work environments. Which materials are used for sound protection walls? Sound protection walls can be made from a variety of materials, including wood, plastic, aluminum, and special sound insulation materials such as stone wool or acoustic panels. How effective are sound protection walls? The effectiveness of sound protection walls depends on various factors, including the materials used, wall thickness, construction, and the environment in which they are installed. Another important factor is the noise frequency. Careful planning and installation are crucial for optimal results. Can I rent a mobile sound protection wall? Yes, we offer the option to rent mobile sound protection walls, which is especially useful if you need temporary sound protection for events, construction sites, or other short-term projects. Are there sound protection walls for specific industries or applications? Yes, there are sound protection walls designed specifically for industrial applications, workshops, offices, event venues, and other specific environments. These are often adapted to the special requirements and standards of the respective industry. How much do sound protection walls cost? The costs for sound protection walls can vary depending on size, materials, and functionality. Complex, tall noise protection walls e.g. for outdoor use can cost several thousand euros per m². Simple noise protection mats for construction fences start at around EUR 70 per m² net.

Mobile Noise Barrier System

Noise barriers as an effective noise protection measure for construction sites and production, also usable as a work tent, assembly tent, or noise protection cabin The very flexible and mobile noise protection elements can, for example, be easily attached to construction fences or barriers (suitable installation kits with metal hooks / tension ropes available) or used as a mobile work tent or noise protection cabin on wheels. The noise protection elements are lightweight, weather-resistant and easy to install. The mobile assembly tent offers, in addition to noise protection, also weather protection for work and assembly outdoors. Properties of the mobile noise protection elements: Height: 2050 mmWidth: 1335 mmColor: Green (other colors or custom designs available on request for larger order quantities)Maximum noise reduction (laboratory tested / under laboratory conditions): 43.4 dBFlame retardant (according to BS 7837-1996, ASTM E84)Waterproof on both sidesUV resistantLong-lastingNoise protection can be increased by double layering consecutivelyDurable and lightweight (5.5 kg)Easy to install (1 person in approx. 30 seconds with installation kits)RollableUV resistant (5 years)With 2 night reflective stripsManufacturer's warranty: 2 years Minimum order quantity: from 10 pieces (68 noise protection elements correspond to 1 pallet) Note: Images digitally edited. Original product comes with prints. We also offer similar noise protection mats for construction fences for rent or sound insulation mats for immediate purchase.

mobile noise protection barrier for construction sites

Alternative to mobile construction fencing - Multifunctional, sound-absorbing and mobile protective wall for construction sites with privacy screen, theft protection and vandalism protection Unlike a construction fence, a mobile noise barrier actively reduces construction site noise. It is also more difficult to climb over than a chain-link fence. Its solid design also provides good visual screening. It absorbs sound, facilitates compliance with regulations, and effectively protects residents – while offering the same flexibility for temporary use. A mobile protective wall/functional wall replaces the classic construction fence where simple barriers are insufficient . It combines acoustic shielding , visual privacy , and a mechanical barrier in a modular system – specifically for urban, sensitive, or high-value construction sites. Technical description Module dimensions: approx. 1,680 × 2,000 mm (height) Element thickness: approx. 30 mm Construction / Material principle: galvanized sheet metal cassette with a multi-layered composite of sound-insulating and sound-absorbing materials; non-combustible , rot-proof , permanently protected by a dust protection layer and internal perforated/expanded metal cover; edge stiffening via galvanized tubular profiles for support function Effective noise reduction (guideline value): approx. 11-12 dB in free field (depending on construction/distance and geometry), proven by the manufacturer using field measurements. Installation note (important): For correct use , support/brace or ballast (wind loads!). Typical use cases on construction sites Perimeter measurement of construction site areas (noise shielding to the outside) Renovations in city centers / historic centers Construction work in urban areas with close proximity to neighboring properties Shielding of temporary machine areas (compressors, units, separation technology) Protection during night work / short-term measures when rapid setup is crucial %C3% BCr %20Baustellen% 20au %C3% 9Fen">Submit an inquiry

Mobile Soundproof Partition Wall

Temporary or Permanent Soundproof Walls for Outdoors and Indoors The cladding of the scaffold surface serves to insulate and absorb airborne sound. The elements are suitable as temporary and permanent soundproof walls for outdoors and indoors. The system can also be used as a dust protection wall and privacy screen. The supporting structure is either provided by the customer or consists of modular scaffolding. For installation on scaffolding systems, two equipment variants are suitable. The first variant is equipped with eyelets (diameter 16 mm). These are arranged around the entire circumference in a fastening edge at intervals of approximately 30 cm. The load capacity per eyelet is approx. 1 kN. The eyelets are used to fasten the elements to the scaffold poles with cable ties or similarly suitable aids. The second variant is fastened to the scaffold poles using buckle straps. The straps are mounted on the face layer. The load capacity of a buckle strap is approx. 1 kN when the locking mechanism is tightened by hand. Effective Noise Protection Indoors and Outdoors: Efficient Protection from Noise-Intensive Machines and Other Disturbances The low surface weight of the soundproofing system enables individual noise control both in production and administrative areas. Customer-specific solutions and measures are developed to protect affected persons from noise and maintain productivity. The comprehensive sound protection includes reducing sound transmission inside the building and minimizing sound transmission to the outside. Both temporary and permanent noise sources can be acoustically encapsulated. For fastening the system, clamping strips, bayonet locks, or rollers on rails are used. To acoustically separate workplaces, the soundproofing elements can be mounted, for example, as a curtain system, a noise protection cabin, or on a support frame. Characteristics of the Soundproof Wall System: Material: Three-layer high-strength polyester fabric. Filled with non-combustible insulation wool Length: Up to 4 m Surface weight: ≈ 5.5 kg/m² Element thickness: ≈ 7 cm Rated sound reduction index: Rw(C; Ctr) = 21(-1; -4) dB according to DIN ISO 10140-2 Rated sound absorption coefficient: αw= 1.00 according to DIN ISO 11654 Sound absorption class: A according to DIN ISO 11654 Fire behavior Fabric: B1 according to DIN 4102-1 / DIN 4201-1 Face layer: B1 B-s2-d0 according to EN 13501-1 Mineral wool filling: A1, non-combustible according to DIN 4102-1 Moisture behavior: Mineral wool filling: Water repellent according to DIN 53354

Movable Acoustic Barriers

Soundproof walls for interior use, movable on a rail system Ideal for industrial and commercial applications, e.g. for 🔹 Production lines & manufacturing facilities 🔹 Machine & Compressor Rooms 🔹 Office and training rooms 🔹 Technical equipment & server rooms High-quality soundproofing technology The movable noise barriers consist of 50 mm thick soundproofing elements with sound-absorbing mineral insulation and a perforated galvanized sheet metal cladding, as well as a guide rail with supports. The design was developed according to rigorous static calculations and tested in accredited testing laboratories. 🔧 Maximum load capacity of the guide rail: 1,500 kg (optionally 4,000 kg with additional transition plate) %C3% inside" class="btn btn-default">Submit an inquiry

Noise Protection Cabin

Noise Protection Construction Fences

Noise Protection Construction Fences in a Complete Set Padded soundproofing mats for hanging, specially designed for construction fences. The set consists of: 4 x black soundproofing mats (3.5 m x 2.0 m) 4 x construction fences (3.5 m x 2.0 m) 4 x special heavy concrete blocks (35 kg) 4 x support braces (for wind load) Matching connection clamps Cable ties for attaching the soundproofing mats Free delivery within Germany Further product details for the construction fences with noise protection available here for download. We also offer our noise protection for construction fences for rent.

Noise Protection for Construction Fences Rental

Soundproofing mats for rent, suitable for all standard construction fences. Construction noise can be burdensome and very disruptive for many people . It can not only impair quality of life but also make people ill . For this reason , it is important to take action to reduce the noise . With our construction fence noise barrier .​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​ Can you hear construction noise ?​​ effectively reduce .​​​​​ "The client, as the 'party responsible for the condition,' is obligated to prevent harmful environmental impacts emanating from their construction site – including construction noise – that are avoidable while adhering to the principles of proportionality and the state of the art. The consequences of unavoidable construction noise are generally to be borne by the client. Before issuing a tender, the client must ascertain whether harmful environmental impacts are to be expected from operations on their construction site. Due to the close proximity of construction sites, this is almost always the case in inner-city locations." (Source: Association for the Promotion of Fair Conditions in Construction - Information Sheet on Construction Noise ) Our acoustic rental solutions help combat noise pollution in many areas, such as construction noise, demolition work, road construction, industry, transformers, generators, pumps, drilling, truck traffic noise, railway traffic noise , festivals, public events, football matches, concerts and other noise-generating activities. Height: approx. 205 cm Width approx. 355 cm Weight: approx. 10 kg The noise barrier for rental construction fences consists of soundproofing mats, is easy to transport, and can be easily attached with cable ties. We recommend conducting a wind calculation before installation and equipping the construction fence with suitable accessories (especially heavy concrete bases and support struts) to ensure good stability and wind resistance. Other technical characteristics of soundproofing mats for rent (or similar): Material: PVC tarpaulin, PVC mesh and polyester wadding Noise absorption : Up to 60% Sound reduction : EN ISO 717/1, up to 30 dB (frequency-dependent) Quick installation : Assembly in 5 minutes Reusable and durable : UV-resistant, weatherproof (rain and frost resistant) Versatile : Adaptable to all structures Reduction : EN ISO 717/1, R'W(C,Ctr): 16 dB (-1,-4) Absorption coefficient : EN ISO 11654, αw: 0.4 Colors : Grey (special sizes in white) Note: We generally only rent out the noise barriers without construction fences. Exceptions are possible for larger orders. We also offer acoustic tarpaulins for noise protection on scaffolding for rent . The " General Administrative Regulation on Protection against Construction Noise " applies to the operation of construction machinery on construction sites, insofar as the construction machinery serves commercial purposes or is used within the framework of economic enterprises. The following emission limits are set in the regulation: a) Areas in which only commercial or industrial facilities and residences for owners and managers of the businesses, as well as for supervisory and on-call personnel, are located, 70 dB(A) b) Areas where predominantly commercial facilities are located, 65 dB(A) during the day, 50 dB(A) at night c) Areas with commercial facilities and residential units, in which neither predominantly commercial facilities nor predominantly residential units are located, 60 dB(A) during the day, 45 dB(A) at night d) Areas that primarily contain residential buildings, 55 dB(A) during the day, 40 dB(A) at night e) Areas consisting exclusively of residential buildings, 50 dB(A) during the day, 35 dB(A) at night f) Spa areas, hospitals and nursing homes 45 dB(A) during the day, 35 dB(A) at night For Austria, the following applies: " Legal regulation for noise emissions from equipment and machinery intended for outdoor use "

Noise Protection Mats

Buy soundproof tarpaulins and soundproofing mats for construction fences Advantages of noise reduction mats for construction fences: Excellent sound insulation : Proven to reduce noise pollution according to expert reports, ideal for use in noise-sensitive areas. Robust materials : High resistance to weathering, mechanical stress and UV radiation. Easy handling : Quick assembly using cable ties thanks to low weight and flexible design. Versatile applications : Perfect for construction sites, machinery, events as mobile noise barriers. The technical specifications of the soundproof tarpaulin for construction fences are impressive. The tarpaulin achieves a weighted sound reduction index (R'W(C,Ctr)) of 16 dB (0,-2) according to EN ISO 717/1. Furthermore, it absorbs sound with an efficiency of up to 60% (measured according to EN ISO 11654) and has a weighted sound absorption coefficient (αw) of 0.4. Our weatherproof and sound-absorbing noise barrier mats for construction fences are made from high-quality materials that ensure a long service life and high durability, even when used outdoors . They are resistant to moisture, dirt, and wear, so they retain their effectiveness even under intensive use. They are also easy to clean and maintain. The soundproof tarpaulin comes in the standard color (anthracite) gray (different from the image). Special colors such as black, blue, green, beige, and white, optionally with custom printing, can be requested via email for an additional charge . %20f% C3 %BCr% 20Bauz %C3% A4une %20Farbauswahl% 20in%20Schwarz,%20Blau, %20Gr% C3%BCn, %20Grau% 20und%20Beige.png" alt="Colored noise protection mats in blue, gray, beige, black and white" width="600" height="100" /> Optionally also available as specially flame-resistant soundproof mats. Submit an inquiry With a total mass of approximately 10 kg per sheet, the noise reduction mat is a lightweight yet effective solution for construction site noise . It not only offers high sound reduction but also ensures easy installation and fastening. Made in the EU Delivery time: approx. 1-2 weeks (small quantities usually in stock) FAQ Noise protection mats for construction fences What are noise-reducing mats for construction fences? Noise-reducing mats for construction fences are special mats that can be attached to standard construction fences (3.5 m x 2 m) to reduce noise and thus protect the surrounding area from noise pollution, e.g. from construction sites or events. How do soundproofing mats for construction fences work? Noise-reducing mats for construction fences consist of sound-absorbing materials such as sound-absorbing foam or acoustic barriers. These materials absorb sound and reduce noise propagation. Why are noise-reducing mats important for construction fences? Construction sites often generate significant noise that can disturb residents. Noise-reducing mats for construction fences help to reduce noise on the construction site and thus improve the quality of life for residents. They also contribute to compliance with noise protection regulations. What are the advantages of soundproof tarpaulins for construction fences? Soundproof tarpaulins for construction fences offer several advantages. They reduce noise levels and contribute to noise reduction during construction . This allows residents to live and work with less disturbance. The soundproof tarpaulins also serve as visual barriers and protect against dust and dirt that can emanate from the construction site. The mats can also be custom printed upon request , for example, with a company logo or advertising. Thanks to their standardized design, they can be installed quickly and easily on any standard construction fence. Are there different types of noise-reducing mats? Yes, there are different types of noise barrier mats for construction fences. Some noise barrier mats are made of sound-absorbing material, while others also have reflective surfaces to reflect sound back. " Sound absorption refers to the reduction of sound energy, especially through conversion into heat. Absorption is synonymous with 'swallowing' and 'soaking up'." ( Source: Wikipedia ) "Generally , sound-absorbing noise barrier mats are preferable to sound-reflecting ones , as sound-reflecting mats simply redistribute the noise. The mats are also available in different sizes, colors, and with varying levels of sound insulation. There are also specially flame-retardant soundproofing tarpaulins, for example, for indoor applications ." How are soundproofing mats installed for construction fences? Installing soundproofing mats for construction fences is generally straightforward. The mats are attached to the fences using cable ties or small elastic tensioning ropes. It is important to follow the manufacturer's instructions to ensure proper installation. Furthermore, the fences must be properly secured to prevent them from toppling over, for example, during a storm. Heavy-duty concrete bases, supports, ground anchors, or earth screws can be used for this purpose. Can noise-reducing mats for construction fences be reused? Yes, many noise-reducing mats for construction fences are reusable . High-quality mats are generally durable and can be transported and reused from one construction site to another as needed. With proper care, noise-reducing mats can last for more than 5 years. Are the sound-absorbing mats also available in a light-permeable version? A custom-made, translucent version in white material is possible. If required, the outer tarpaulin can also be made transparent (the inner fleece/mesh material is only available in white).

Office Noise Protection

Noise protection for open-plan offices 🟧 Acoustic partition walls – room dividers with sound insulation Ideal for temporary workspaces, team zones or corridor partitions • Dimensions: 180 cm height , 100 cm width (straight or adjustable as a corner element with angle; for stability reasons, the corner element must be connected to a straight wall element) • Thickness: 25 mm • Material: Polyester soundproofing fleece (30% recycled), grey melange • Linkable, connected with a black leather strap • Cutout for cable routing • Feet: silver, powder-coated – stable & elegant • Uses: Open space, temporary meeting areas, reading zones 🟦 Acoustic wall elements – where design meets function Perfect for reception areas, meeting rooms or open-plan offices • Wall mounting with magnetic strips or adhesive dot • Felt look, grey melange, flame retardant according to DIN 4102 (B1) • Sizes & Sets: – Set of 4, each 65 × 32.5 cm – Set of 4, each 25 × 100 cm – Set of 4, each 25 × 200 cm – Set of 12 honeycomb molds, each 17 × 15 cm , 8 pieces in 1.6 cm thickness & 4 pieces in 2.5 cm thickness • Application: Wall cladding for reverberation reduction, visual accents in customer and work areas 🟩 Desk enclosure – freestanding Personal retreat zones in team or open-plan offices • Height: 60 cm , Material thickness: 16 mm • Two variants: – 3-sided folding (rounded corners, flexible) – 2-sided insertion (dovetailed corner joint, usable on the right/left) • Non-slip, transparent glides • Integrated cable outlet • Use: Shared desks, exam stations, call center workstations 🟥 Acoustic desk partition system (assembled) Fixed visual and acoustic protection for structured workplaces • Height: 50 cm , Material thickness: 25 mm • Mounting with stable brackets (overhang 2 cm, gap 1 cm) • Side panels sold separately, connected with powder-coated metal connectors • Accessories: Knee area panel , organizer rail • Use: Offices with fixed workstations, libraries, training rooms Furthermore, we offer a soundproof telephone booth so that you can make calls in a relaxed atmosphere or work with focus, even in open-plan offices. We also offer mobile office workboxes that can be used both indoors and outdoors.