"Bicycle" Floor Sign
Outdoor floor sign - Cyclist floor sign - self-adhesive floor marking for parking spaces and parking areas Simple and quick bonding. Wear-resistant and highly durable. Excellent traction. Suitable for concrete paving and asphalt. The easy application and high durability make our floor signs the ideal floor marking for parking lots or parking areas. The permitted load capacity, e.g. for cars, refers only to driving over the sign. Attention! For outdoor use, bonding primer No. 5 and edge sealant must always be applied. See accessories below. Material: PVC Slip class: R11 according to DIN 51130 Material thickness: 1.3 mm Surface: frosted Adhesive: Permanent butyl adhesive Adhesive properties: permanently adhesive Temperature range: -20°C to +60°C Area of application: outdoor areas Resilience: Suitable for pedestrians, pallet trucks, cars, and forklifts Surfaces: Asphalt, smooth concrete screed, concrete paving
Aluminum Trench Bridge
Pedestrian Bridge for Trenches at Construction Sites The decking of the pedestrian bridge for trenches is made of non-slip aluminum checker plate 3/4 mm including approach ramp, base frame, railing and decking made of aluminum, lateral protection of the foot space by aluminum side boards, the side railings are equipped with red-white-red reflector strips, carrying handles welded on both sides allow ergonomic carrying, four integrated stacking brackets ensure safe transport and proper storage, the bridges can be secured against slipping with the ground nail Art.-No. DD-SCHK-30W80 through four integrated eyelets, load capacity: 200 kg/m²
Barrier Gate
Barrier gate with boom, gas spring and pendulum support Main support: steel construction 120 x 80 mm, rectangular tube with base plate 360 x 360 x 8 mm for anchoring, including 4 drill holes Ø 20 mm for anchors, hot-dip galvanized and red powder coated,Locking by bolt when barrier is open and closedPendulum support: aluminum tube with adjustable footBarrier boom: thick-walled Ø 80 mm aluminum tube, powder coated red, with reflective stripes, locking at the main supportTotal width: clear width + approx. 180 mm Lockable with: padlock, triangular lock, profile cylinder lock and triangular lockplus profile cylinder lock on the main support
Charging Station e-Car Floor Sign
Outdoor Floor Sign - Charging Station for Electric Vehicles, Self-Adhesive Floor Marking for Parking Spaces and Parking Areas Easy and quick application. Wear-resistant and highly durable. Excellent floor adhesion. Suitable for concrete paving and asphalt. The easy application and high durability make our floor signs the ideal floor marking for parking lots or parking areas. The approved load capacity, e.g. passenger cars, refers only to driving over the sign. Attention! For outdoor use, Primer No. 5 and edge sealing must always be applied. See accessories below. Material: PVC Slip Resistance Class: R11 according to DIN 51130 Material Thickness: 1.3 mm Surface: matte Adhesive: Permanent butyl adhesive Adhesive Properties: permanently adhesive Temperature Range: -20°C to +60°C Application Area: Outdoor areas Load Capacity: Suitable for pedestrians, pallet trucks, passenger cars, forklifts Substrates: Asphalt, smooth concrete screed, concrete paving
Combined Traffic Sign "10 km/h / Road Traffic Regulations Apply"
Size: 600 mm x 400 mmHighly reflective film RA2For smooth and splatter-free surfaces or as a replacement for worn signs
Concrete Barrier
Concrete barriers for construction sites The concrete barriers for construction sites can also be installed at an angle of up to 6°, ensuring safe installation even in curved sections. In addition to the connecting elements with locking bolts, the concrete elements can be anchored in the ground with ground anchors or screws, creating a solid concrete barrier . The elements have optional built-in reflectors for improved safety and can be loaded with forklifts and a crane. Additionally, the barrier elements can be fitted with fences, barrier gates or pipe brackets. Width: 2.20 m Weight: 1500 kg Alternatively, there is also a concrete barrier system for standard construction fences with a length of 3.5 m or alternatively with a solid barrier post .
Cover Cross for Traffic Signs
Cross-cutting device for signs and traffic signs UV-resistant, cold-impact resistant and very flexible, white-colored plastic The high flexibility ensures that the device can also be mounted on wide sign frames. Long shelf life thanks to protective film edge Expandable with a retrofittable extension Foil type RA2/C red, special foils available on request Available lengths: 750 mm, 1000 mm and 1200 mm, optional/subsequent extension by 800 mm
Cover Tape for Traffic Signs
Masking tape for traffic signs The masking tape for traffic signs is easy to apply and remove. The surface should be dry, dust-free, and grease-free. For optimal results, a preliminary test is recommended. 50mm x 33m, MOQ 1 PU = 36 rolls 75mm x 33m, MOQ 1 PU = 24 rolls ✅ Product features of the masking tape for road signs: High signal effect: In bright orange or deep black for maximum visibility. Opaque: Traffic signs remain completely obscured – no see-through effects. Residue-free removal: Can be easily removed even after up to 3 months of use. UV protection: A special layer protects the adhesive from harmful UV radiation. Weatherproof: Works reliably at temperatures from -30 °C to +70 °C. Robust & stretchable: High tear resistance and flexibility for professional applications. 📐 Technical specifications of the masking tape for traffic signs: Carrier material: Rigid PVC film Total thickness: approx. 0.11 mm Adhesive: Removable rubber Adhesive strength: approx. 1.0 N / 25 mm Temperature range: -30 °C to +70 °C Ideally, the tapes should be applied at an object and ambient temperature of +10°C to +25°C. Condensation should be avoided, for example, when the materials to be joined are moved from cold storage areas to warm production areas. Shelf life: approx. 12 months under recommended storage conditions %C3% BCr%20Traffic sign" class="btn btn-default">Submit a request
Crash-Resistant Traffic Signs
Product characteristics of traffic signs, e.g. directional signs in curves The traffic signs and support posts made of plastic are characterized by the following properties: Traffic sign holders suitable for triangular and round support posts Individual elements can be attached separately or used in combination on top of each other Quick and easy assembly In case of damage, individual components can be easily replaced. Impact-resistant and splinter-free plastic Plastic white dyed throughout Dimensionally stable and flexible UV and acid resistant Rounded corners and surrounding protective foil edge Traffic sign film type RA2/C microprismatic
Custom Parking Signage
Aluminum composite RA1: 3mm thick, rounded corners. Reflective foil class RA1/A Aluminum composite RA2: 3mm thick, rounded corners, reflective foil class RA2/C Foil RA2: 0.5mm thick, self-adhesive for smooth and gap-free surfaces. Aluminum composite: 3mm thick. Polycarbonate: 0.7mm thick, self-adhesive for various industrial floors. PVC: 1mm thick, self-adhesive.
Custom-Made Access Ladder as Staircase
Step-over as Staircase Our custom-made step-over staircases made of GRP set new standards in safety and adaptability for work environments where access to pipes and conveyor belts is indispensable. These self-supporting staircases provide an ideal solution to safely and efficiently bridge pipes or conveyor belts. Precise adaptation to your needs We understand that not all workplaces are the same. Therefore, our GRP step-over staircases are manufactured exactly according to your specifications. Whether special heights, widths or other requirements – we offer customized solutions to ensure the staircase perfectly fits your work environment. Outstanding safety Safety is our top priority. Our GRP step-over staircases are equipped with non-slip steps and sturdy handrails to guarantee safe crossing of pipes and conveyor belts. This minimizes the risk of injury and creates a safe working environment. GRP: Durable and corrosion-resistant GRP is a material known for its durability and corrosion resistance. Our staircases are made from high-quality GRP, which means they retain their stability and integrity even under the most demanding conditions. Versatile applications These custom-made GRP step-over staircases are used in various industries, including logistics, chemical industry, oil industry, shipping, mining, and other manufacturing sectors. They are a smart investment to increase productivity while ensuring workplace safety. Conclusion If you are looking for a safe and customized solution to cross pipes, pipelines, and conveyor belts, our GRP step-over staircase is the ideal choice. With top-class safety, durability, and versatile applications, these staircases perfectly meet your operational requirements. Contact us today to plan and order your custom-made GRP step-over staircase.
Customer Parking Straight Ahead
Aluminum Composite RA1: 3mm thick, rounded corners. Reflective foil class RA1/A Aluminum Composite RA2: 3mm thick, rounded corners, reflective foil class RA2/C Foil RA2: 0.5mm thick, self-adhesive for smooth and gap-free surfaces. Aluminum Composite: 3mm thick. Polycarbonate: 0.7mm thick, self-adhesive for various industrial floors. PVC: 1mm thick, self-adhesive.
Direction Plate for Curves
Optimal traffic guidance through "direction signs in curves" (sign 625) in challenging and dangerous curves Thanks to its precisely engineered angle design , the Winkel curve guidance sign guides vehicles safely and accurately, even on tight and complex curves. The sign provides clear orientation and minimizes the risk of accidents by effectively controlling traffic flow and providing unambiguous directional guidance. This optimized traffic management increases road safety and helps prevent congestion and dangerous situations. High-quality materials and robust construction of the Made from durable materials, this curve guidance sign is ideal for permanent outdoor use. Its weather- and UV-resistant surface guarantees a long service life, even with intensive use and adverse weather conditions. This durability makes it the perfect choice for traffic facilities where the highest safety standards are essential. Simple and quick installation The well-designed angled directional sign allows for easy installation – whether on roads, country lanes, highways, or inner-city traffic routes. Thanks to the intelligent mounting system, the sign can be installed quickly and securely, which is particularly advantageous in the case of short-term traffic changes or temporary detours. Diverse applications The Vario Angle Curve Guide Board has a wide range of applications, as diverse as the challenges of road traffic itself. It is ideally suited for: Road construction projects: Optimize traffic management at construction sites and during detours. Public transport routes: Ensure clear directional signage at intersections and in bending areas to improve traffic flow. Temporary traffic regulations: Use the board at major events or as a temporary measure to prevent accidents. Industrial and commercial areas: Guide heavy vehicles and trucks safely through tight bends and complicated access roads. Contribution to accident prevention and the satisfaction of all road users Thanks to its precise signage, the angled curve guidance system makes a significant contribution to reducing the risk of accidents. Clear visual guidance minimizes misunderstandings and improves driving behavior, ultimately leading to a smoother traffic flow and greater satisfaction for all road users. Technical details Material: Impact-resistant and shatterproof plastic, dimensionally stable and flexible, rounded corners and surrounding protective film edge Dimensions: approx. 720 x 520 x 165 mm Traffic sign: Traffic sign 625 "Direction sign in curves" - one-sided (can be erected on the left or right side) or both-sided Image carrier color: White Adhesive surface: approx. 515 x 515 mm Traffic sign foil: Type RA2/C Foil size: 500 x 500 mm Settings: Adjustable angles in 22.5° increments (can be fixed with screws) Snap-on cuff: Snap-on cuff with insertion depth approx. 200 mm with internal locking elements Assembly: Quick and easy assembly on VARIO triangular support posts and VARIO round posts Weight: approx. 1.65 kg including the foil Conclusion: Directional signs in curves significantly reduce the risk of accidents in curves. Numerous traffic safety studies demonstrate that clear and precise traffic guidance – including directional signs in curves – can make a significant contribution to accident prevention. Specific studies that examine the effect of directional signs in curves in isolation are less common; however, more comprehensive research and traffic planning concepts confirm that optimized signage and visual guidance positively influence driving behavior and reduce the risk of accidents. For example, analyses by the Federal Highway Research Institute (BASt) and other specialist institutes indicate that measures to improve orientation in complex traffic situations – such as additional directional signs – can lead to fewer accidents. Rural roads pose particular dangers, as they are often less well-developed and lack the modern safety standards common in urban areas. Sharp bends, inadequate signage, and insufficient lighting can all contribute to an increased risk of accidents. Furthermore, drivers encounter unexpected challenges such as oncoming traffic, wildlife crossings, or sudden obstacles at high speeds, which are less frequent in dense city traffic. These factors underscore the need to focus more on precise traffic management and additional safety measures on rural roads as well—for example, the use of directional signs on bends—in order to sustainably reduce the risk of accidents. The angled curve guidance sign is more than just a traffic sign – it's an essential component of modern road safety. With its robust construction, versatile applications, and easy installation, it represents a future-proof solution that meets the demands of modern road traffic. Invest in reliable and effective traffic management and optimize your road infrastructure with these innovative directional signs for curves. %20in% 20curves" class="btn btn-default">Submit a request
Drive-Over Guide Posts
The delineator post tilts up to an angle of 90° due to the spring-tilt element and then automatically returns to its upright position. In case of damage to the delineator post casing, the mounting device can be disassembled and reattached to a new casing. Tested and approved according to DIN EN 12899-3 (CE certified). Description Drive-over and tiltable delineator post with self-righting function via spring-tilt element Delineator post length 105 cm Wall thickness 3 / 4.5 mm / special thickness Reinforcement Profile core with self-righting mechanism Reinforcement length 30 cm Bottom side System "for impact mounting with spring-tilt element" Option Integrated snow guide rod with locking mechanism and reflectors
Drive-Over Plastic Bollards
Flexible Barrier Posts Made of Plastic as Kickback Bollards Thanks to its innovative design made of plastic tubing, the Kickback Bollard offers exceptional resistance to impacts and overrun. Even at high speeds, the bollard leaves hardly any visible marks on the vehicle, significantly improving long-term usage and traffic safety. The use of the overrun bollard made of plastic not only contributes to safety on roads and squares but also minimizes the need for time-consuming repairs for municipalities and industrial companies. Its excellent durability and resistance make it a cost-effective solution for long-term traffic safety measures. Rely on the overrunnable barrier post made of plastic to ensure effective and sustainable traffic safety in your work and public areas. Available color options for the overrunnable bollard: white with red reflective stripes yellow with black stripes Variants of the overrunnable barrier post: With base plate for bolting down With base plate for bolting down Quick Release With ground sleeve for concreting in
Folding Bollard
Foldable Barrier Post Available variants of the foldable barrier post:1) For anchor bolt mounting with base plate 100 x 150 mm2) For concreting in with ground sleeve approx. 400 mm below ground Optional with one or two eyelets, e.g., for attaching barrier chains.
Guide Post Austria
Road Delineator Posts / Road Posts for Austria In Austria also referred to as guidance stakes or colloquially as boundary posts or road delimitation pillars. We offer delineator posts for Switzerland, Austria, and Germany. TypeAustria Description Base Delineator Post Delineator Post Length 100 - 200 cm Wall Thickness 3 / 4.5 mm / special thickness Bottom Side open Reinforcement none / tubular core / profile core Reinforcement Length 50 / 75 / 100 / 155 cm Delineator Post Profile triangular Reflectors 40 x 180 mm Option with / without integrated snow pole Installation Instructions for Delineator Posts The road posts can be installed using different methods: Option 1) Of course, the base parts can also be simply driven into the ground as before; the above points are to be understood as recommendations only. The special base plate ensures secure anchoring of all aforementioned delineator posts. The universal base part is driven into the ground using a rubber hammer or an assembly aid. Option 2) To ensure that the delineator posts stand permanently straight (even after winter), we recommend the installation method described below. 1. Drill or dig a hole (diameter 25 – 35 cm). Depth approx. 50 cm. 2. Fill in in-situ concrete up to just below the road surface level. 3. Insert the universal or round tube base part and align straight. Option 3) As embedment delineator posts with base for embedding (see pictures)
Guide Post Switzerland
Road Delimitation Posts / Road Posts for Switzerland We offer delineator posts for Switzerland, Austria and Germany. TypeSwitzerland Motorway / Autostrasse Description Base / Embedment Delineator Post Delineator Post Length 120 - 160 cm Wall Thickness 2 / 3 / 4.5 mm / special thickness Bottom Side open / closed Reinforcement none / tube core / profile core Reinforcement Length 50 / 75 / 100 / 155 cm Delineator Post Profile triangular Reflectors 80 x 120 mm / 80 x 240 mm / ø 80 mm Options with / without pull-out protection with / without integrated wildlife warning reflector integrated snow guide rod with lock and reflectors Installation Instructions for Delineator Posts The road posts can be installed using various methods: Option 1) Of course, the base parts can also still simply be driven into the ground as before; the aforementioned points are to be understood as recommendations only. The special base plate ensures secure anchoring of all the aforementioned delineator posts. The universal base part is driven into the ground using a soft hammer or assembly aid. Option 2) To ensure that the delineator posts remain permanently upright (also after winter), we recommend the installation method described below. 1. Drill or dig a hole (diameter 25 – 35 cm). Depth approx. 50 cm. 2. Pour in in-situ concrete up to just below road surface level. 3. Insert and align the universal or round tube base part straight. Option 3) As embedment delineator posts with base for embedding (see pictures)
Guide Ramps
Flagway boundaries The yellow plastic guide rails for road marking have the following characteristics: Material: High-quality, weather-resistant plastic that is UV-stabilized and resistant to various chemicals. This makes the guide rails particularly durable and resilient. Size and weight: The guide rails are available in various sizes, making them flexible for different requirements. They offer stable stability and will not tip over in wind or collisions. Visibility: Bright colors and reflective markings ensure they are clearly visible both day and night. These features improve visibility and safety in dark or low-light conditions. Installation: The guide rails are equipped with a practical plug-in or screw mechanism, allowing for quick and easy installation and removal. This saves valuable time when setting up and dismantling safety zones. Flexibility: Thanks to their modularity, multiple guide rails can be connected to create larger barriers or markings. This allows for the safe separation of sections of varying lengths. Length: 1,095 mm Width: 248 mm Height: 90 mm Weight: 21.5 kg Mark: 225B Quantity per pallet: 77 Openings: 1 square opening: 40 x 40 mm and 1 square opening: 20 x 20 mm The roadway barriers are connected by means of a coupling. Matching beveled end pieces available Advantages of guide thresholds: Durability: The guide rails are resistant to weather conditions, frost, high temperatures and chemicals, making them particularly durable and easy to maintain. Easy to use: They can be easily transported and installed without requiring special tools or extensive training. Cost-efficient: Due to their long lifespan and low maintenance costs, they are a cost-effective solution for both temporary and long-term applications. Environmentally friendly: The use of recyclable plastic contributes to a more environmentally friendly solution and reduces the ecological footprint. Areas of application for the yellow plastic road markings: Construction site safety: Creating safe zones for workers and vehicle traffic. Internal traffic management: Barriers for diverting vehicles during road closures or works, as well as parking areas from the factory premises. Events and trade fairs: demarcation of areas for pedestrians, safety paths or emergency exits. Emergency markings: Used in critical zones to quickly make potential hazards visible. Thanks to their versatility, durability and ease of use, these guide thresholds offer a reliable solution for a wide variety of safety applications and traffic management situations. %20Guide rails% 20made%20plastic" class="btn btn-default">Submit an inquiry
Light Signal (LED + WIFI)
LED lights with WIFI connection Intercommunicating beacons Pack of 6 units On/Off button Extremely durable Visible over long distances Magnetic adhesion Includes 2 AA batteries each Light: red and blue
Magnetic Track Guidance
Alternatively, we also offer optical guidance tape for automated guided vehicles and systems.
Marking Button with Reflectors
Reflective Marking Button made of Plastic The yellow marking button with a diameter of 120 mm has two reflector lenses on both sides and is optionally equipped with a red flag. We also offer aluminum marking nails with reflectors.
Marking Films for Road Marking (Construction Site)
BAST-approved self-adhesive yellow marking film Standard marking film: 12 cm wide - 2.4 kg/m and 15 cm wide - 2.7 kg/m Available on request: bus symbol, bicycle symbol, marking arrows (straight ahead, left, right) and suitable equipment (laying device, primer sprayer and pressure roller) %20gepr% C3 %BCft% 20Stra %C3% 9Fenmarking" class="btn btn-default">Submit a request Instructions for using self-adhesive marking film: Professional installation of self-adhesive marking film For proper application of self-adhesive marking film, you should follow these steps: Dry road surface: Ensure that the road surface is completely dry. There should be no precipitation in the relevant section of the route for at least 48 hours before installation. Installation in low humidity: When installing at night or in high humidity, moisture can form on the road surface. This can lead to problems with the adhesive bond. Therefore, ensure that the road surface is dry before applying the marking film. Surface preparation: Remove all dirt, such as dust, oil, wax, grease, salt, sand, or other contaminants from the surface. For new concrete ceilings, it is recommended to remove concrete slurry using a high-pressure water jet at least 48 hours before installation. Damage-free surface: Do not place the marking film on joints, seams, or damaged road surfaces. Monitor weather conditions: Before installation, record the current weather data at the construction site using suitable measuring devices. Document this data in the installation log. The air and ground temperature should be at least +5°C, while the relative humidity must not exceed 80%. Send the self-monitoring log to the appropriate authority within 8 days. Pre-marking: Carry out the pre-marking using suitable materials, e.g., silver bronze. Ensure that the pre-marking is applied approximately 1-2 cm next to the marking foil. Primer: Apply the primer using a suitable sprayer, such as a spray gun with a spray pattern, approximately 2 cm beyond the edge of the film. The primer consumption is typically around 0.25 L/m². Drying time is approximately 3-15 minutes, depending on the ambient temperature and humidity. Only install the film after the primer has dried sufficiently and no longer forms strings. You can check this with a finger test. Use only the recommended primer for the marking film. Our primer, for example, is a suitable standard primer. Laying and pressing down the film: Place the self-adhesive marking film onto the primed surface and press it firmly onto the road surface using a pressure roller. Roll over the film at least three times. Ensure that the applied load is at least 90 kg to prevent the film from peeling off. Please follow these instructions carefully to ensure proper application of the self-adhesive marking film. Removing marking film: Step-by-step instructions for easy removal Self-adhesive marking films can usually be removed cold without leaving residue, provided they are subjected to proper stress. Using road drying equipment (without an open flame, such as a roofer's torch) can facilitate removal. Solvents or water jets are not normally required. It is recommended to wear protective gloves when removing the film. It is important to note that various factors can influence the removal of the marking tape, such as high traffic volume, narrow temporary lanes, a high proportion of heavy goods vehicles, rough road surfaces, or long drying times. Therefore, it is advisable to determine in advance which type of marking tape should be used for the removal process, taking these factors into account. The selection of the tape should not only be based on its traffic-related properties but also consider its removability to avoid problems during the removal process.
Marking Nail with Reflectors
Reflective Marking Nails made of Aluminum Marking nails made of aluminum, 100 x 100 mm, with shaft for insertion or self-adhesive, with two reflector lenses on one side or both sides Adhesive in 10 kg buckets also available on request. We also offer self-adhesive, round marking buttons made of yellow plastic with reflectors.
Contact Us
We look forward to your technical challenge.
Order-based Manufacturing
Every product is individually manufactured for your needs – no off-the-shelf mass production.
Personal Expert Consultation
Direct contact with our experts – we find the technical solution for your problem.
Certified Quality
Made in Germany & EU – all products certified to the highest industry standards.
Europe-wide Delivery
Reliable delivery to the DACH region and all Nordic Countries.