WATCO Anti-Slip Asphalt Paint – water-based acrylic paint for asphalt and concrete
€203.60
Product information "WATCO Anti-Slip Asphalt Paint – water-based acrylic paint for asphalt and concrete"
WATCO Anti-Slip Asphalt Paint is the straightforward way to highlight walkways, access routes and hazard areas on asphalt and concrete in colour while adding slip resistance at the same time. Typical uses are footpaths across company sites, hatched no-go areas, ramps and surfaces that simply need a visual refresh.
The single-pack, water-based acrylic paint is ready to use and needs no primer. According to the manufacturer it also bonds to slightly damp surfaces and offers excellent UV resistance, so colours stay clearly visible over several summers. The finely textured matt finish achieves slip resistance R12 to DIN 51130 (manufacturer data). It is suitable for asphalt, road surfaces, concrete, paving and brick and is designed mainly for pedestrian traffic.
Typical applications
- Walkways and pedestrian zones on company sites
- Marking hazard points and restricted areas
- Outdoor ramps and access routes
Features
- Slip resistance R12 to DIN 51130 (manufacturer data)
- Excellent UV resistance (manufacturer data)
- Single-pack, water-based, no primer
- Also bonds to slightly damp surfaces
Technical data (manufacturer)
| Base | 1-pack water-based acrylic, fine texture |
|---|---|
| Substrates | Asphalt, road surfaces, concrete, paving, brick |
| Finish | Matt, textured |
| Pack size | 5 l |
| Coverage | approx. 15–20 m² per 5 l, depending on surface |
| Recommended coats | 1 |
| Film thickness | 200 µm wet / 140 µm dry |
| Cure time | 24 hours at 20 °C |
| Min. floor temperature | 15 °C |
| Use | Outdoors |
| Shelf life | 12 months unopened, keep frost-free |
For areas with vehicle traffic, the 2-pack Heavy-Duty Anti-Slip Asphalt Paint is the better choice.
The slip resistance rating is manufacturer data from a standardised test method. Whether the surface is sufficient for your specific work area depends on contamination, moisture and use, and should be assessed as part of your risk assessment.
Versions
| Colour | Container | Manufacturer part no. |
|---|---|---|
| Black | 5 l | ASTP5BLK |
| Green | 5 l | ASTP5MGN |
| Tile red | 5 l | ASTP5TRD |
| Light grey | 5 l | ASTP5LGY |
| Grey | 5 l | ASTP5MGY |
| White | 5 l | ASTPWHI5 |
| Safety blue | 5 l | ASTP5SBL |
| Safety yellow | 5 l | ASTP5SYW |
Hazard information under CLP (according to the manufacturer's safety data sheet)
Signal word: Warning
Hazard statements: H373 May cause damage to organs through prolonged or repeated exposure.
Precautionary statements: P260 Do not breathe vapour. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental information: EUH208 Contains 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Wording of the H, P and EUH statements as per CLP Regulation (EC) No 1272/2008, Annexes III and IV; pictograms derived from the classification. The manufacturer's label and current safety data sheet are authoritative.
Note: The components may be classified as hazardous. We will send you the current safety data sheets with classification, labelling and H and P phrases on request before you order. Supplied to trade and industrial users only.
Technical Details
| Operating Conditions: | For outdoor areas, Humid environment, Slip-resistant, UV-resistant |
|---|---|
| Sectors/Industry: | Building & Facility Management, Logistics & Warehousing, Municipalities & Public Institutions, Retail & Hospitality, Schools & Kindergartens |
Login
Stock & Custom Solutions
Standard range from stock plus made-to-order solutions to your specifications.
Personal Expert Consultation
Direct contact with our experts – we find the technical solution for your problem.
Brand Quality
Products from renowned manufacturers – certificates and declarations of conformity per product on request.
Delivery DE & Nordics
Reliable delivery to Germany, Denmark, Norway, Sweden and Finland – Austria and Switzerland on request.
Our Bestsellers
The best-selling products for professional users.
About Hansehandel
What we at HANSEHANDEL, our products and solutions stand for
Our
Mission
Our mission is to make industrial procurement for our partners in Germany and Northern Europe as efficient and reliable as possible. We deliver not just products, but engineering expertise and dependable, personal support.
Our
Vision
We aim to be the agile partner for MRO solutions for companies in Scandinavia and Germany – with technical know-how, deep market understanding and a clear focus on industrial safety.
Frequently Asked Questions
Contact Us
We look forward to your technical challenge.
