WATCO Anti-Slip Coating Cold Cure – polyaspartic floor coating for cold stores
€225.91
Product information "WATCO Anti-Slip Coating Cold Cure – polyaspartic floor coating for cold stores"
Anti-Slip Coating Cold Cure (sold in the UK as Safety Coat Cold Cure) is a two-component polyaspartic coating from WATCO for floors that must stay safe underfoot in the cold – and that often have to be coated precisely when it is cold. According to the manufacturer it can be applied between −10 °C and +25 °C, so it works in cold stores, walk-in fridges and freezers or unheated buildings where epoxies no longer cure reliably.
The finely textured, glossy surface is slip-resistant and, thanks to the spherical aggregate, stays easy to clean. The coating is UV and weather resistant and is therefore also suitable for loading bays and outdoor areas. It bonds to concrete, old asphalt, sound existing coatings, wood and some metals; according to the product data no primer is required. The manufacturer states the floor is ready for heavy traffic after around 16 hours.
Typical applications
- Cold stores, walk-in fridges and freezers
- Unheated warehouses and workshops
- Loading bays and parking areas in cold zones
Features
- Application from −10 °C to +25 °C (manufacturer data)
- Slip resistance R10 to DIN 51130 (manufacturer data)
- High abrasion and scratch resistance, forklift-capable
- UV and weather resistant, indoors and outdoors
Technical data (manufacturer)
| Base | 2-pack polyaspartic resin with anti-slip aggregate |
|---|---|
| Substrates | Concrete, old asphalt, well-bonded coatings, some metals, wood |
| Coverage | approx. 25 m² per 2.5 l per coat |
| Recommended coats | 2 |
| Film thickness | 85 µm |
| Cure time | 24 hours at 0 °C |
| Min. floor temperature | −10 °C |
| Finish | Glossy, finely textured |
| Use | Indoors and outdoors |
| Primer | Not required |
For heated areas with short downtime, Express Coating Anti-Slip is an alternative.
The slip resistance rating is manufacturer data from a standardised test method. Whether the surface is sufficient for your specific work area depends on contamination, moisture and use, and should be assessed as part of your risk assessment.
Versions
| Colour | Container | Manufacturer part no. |
|---|---|---|
| Light grey | 2.5 l | SCCCLGY2 |
| Grey | 2.5 l | SCCCMGY2 |
| Tile red | 2.5 l | SCCCTRD2 |
| Yellow | 2.5 l | SCCCYEL2 |
| White | 2.5 l | SCCCWHI2 |
Hazard information under CLP (according to the manufacturer's safety data sheet)
Component: Resin
Signal word: Warning
Hazard statements: H226 Flammable liquid and vapour. H317 May cause an allergic skin reaction. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements: P280 Wear protective gloves. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P403+P235 Store in a well-ventilated place. Keep cool. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental information: EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Component: Curing agent
Signal word: Warning
Hazard statements: H317 May cause an allergic skin reaction. H332 Harmful if inhaled. H335 May cause respiratory irritation.
Precautionary statements: P280 Wear protective gloves. P284 In case of inadequate ventilation wear respiratory protection. P271 Use only outdoors or in a well-ventilated area. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental information: EUH204 Contains isocyanates. May produce an allergic reaction.
Component: Aggregate
Not classified as hazardous.
Wording of the H, P and EUH statements as per CLP Regulation (EC) No 1272/2008, Annexes III and IV; pictograms derived from the classification. The manufacturer's label and current safety data sheet are authoritative.
Note: The components may be classified as hazardous. We will send you the current safety data sheets with classification, labelling and H and P phrases on request before you order. Supplied to trade and industrial users only.
Downloads
Technical Details
| Operating Conditions: | Abrasion-resistant, Cold-resistant, Cold environment, For indoor use, For outdoor areas, For warehouse, For workshops, Slip-resistant, UV-resistant, Weather-resistant |
|---|---|
| Sectors/Industry: | Food & Beverages, Industry & Production, Logistics & Warehousing, Maintenance & Technical Services, Trades & Workshops |
Login
Stock & Custom Solutions
Standard range from stock plus made-to-order solutions to your specifications.
Personal Expert Consultation
Direct contact with our experts – we find the technical solution for your problem.
Brand Quality
Products from renowned manufacturers – certificates and declarations of conformity per product on request.
Delivery DE & Nordics
Reliable delivery to Germany, Denmark, Norway, Sweden and Finland – Austria and Switzerland on request.
Our Bestsellers
The best-selling products for professional users.
About Hansehandel
What we at HANSEHANDEL, our products and solutions stand for
Our
Mission
Our mission is to make industrial procurement for our partners in Germany and Northern Europe as efficient and reliable as possible. We deliver not just products, but engineering expertise and dependable, personal support.
Our
Vision
We aim to be the agile partner for MRO solutions for companies in Scandinavia and Germany – with technical know-how, deep market understanding and a clear focus on industrial safety.
Frequently Asked Questions
Contact Us
We look forward to your technical challenge.
