WATCO Concrex Asphalt-Reparatur – epoxy repair mortar for heavily trafficked asphalt
€218.15
Product information "WATCO Concrex Asphalt-Reparatur – epoxy repair mortar for heavily trafficked asphalt"
Concrex Asphalt-Reparatur (sold in the UK as Concrex Asphalt Repair) is WATCO's epoxy repair mortar for asphalt and tarmac areas used by forklifts, narrow-wheeled pallet trucks or HGVs. Many standard asphalt patching materials stay slightly soft and get pushed back down under these loads. According to the manufacturer the cured epoxy mortar withstands heavy traffic and is strong enough to anchor guide posts and rails.
The 2-pack resin is mixed with the supplied granite aggregate into an open-textured black mortar whose coarse finish blends in well with existing asphalt. Its strength also allows relatively shallow repairs. Rough holes and cracks need no primer; on smooth substrates WATCO recommends its bonding primer. Suitable for asphalt and concrete, indoors and outdoors.
Typical applications
- Potholes and trip hazards in yards and loading areas
- Thin asphalt toppings and repairs in roadways
- Anchoring posts, railings and guide rails
Features
- For forklift and heavy traffic (manufacturer data)
- Suitable for shallow repairs
- Coarse texture that blends with asphalt
- For indoor and outdoor use
Technical data (manufacturer)
| Base | 2-pack epoxy resin with granite aggregate |
|---|---|
| Substrates | Asphalt, concrete |
| Coverage | approx. 1 m² per 25 kg at 15 mm |
| Cure time | 12 hours at 20 °C |
| Min. floor temperature | 10 °C |
| Primer | WATCO bonding primer on smooth surfaces |
| Use | Indoors and outdoors |
| Storage | 10–30 °C, protect from frost |
| Shelf life | 12 months unopened |
Hazard information under CLP (according to the manufacturer's safety data sheet)
Component: Resin
Signal word: Warning
Hazard statements: H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects.
Precautionary statements: P280 Wear protective gloves. Wear eye protection or face protection. P273 Avoid release to the environment. P391 Collect spillage. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental information: EUH205 Contains epoxy constituents. May produce an allergic reaction.
Component: Curing agent
Signal word: Danger
Hazard statements: H312 Harmful in contact with skin. H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H361 Suspected of damaging fertility or the unborn child. H372 Causes damage to organs through prolonged or repeated exposure. H411 Toxic to aquatic life with long lasting effects.
Precautionary statements: P201 Obtain special instructions before use. P280 Wear protective gloves, protective clothing and eye protection or face protection. P273 Avoid release to the environment. P260 Do not breathe vapour. P391 Collect spillage. P308+P313 IF exposed or concerned: Get medical advice/attention. P301+P310, P330, P331 IF SWALLOWED: Immediately call a POISON CENTER or doctor. Rinse mouth. Do NOT induce vomiting. P303+P361+P353, P310 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Immediately call a POISON CENTER or doctor. P305+P351+P338, P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. P405 Store locked up. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Wording of the H, P and EUH statements as per CLP Regulation (EC) No 1272/2008, Annexes III and IV; pictograms derived from the classification. The manufacturer's label and current safety data sheet are authoritative.
Note: The components may be classified as hazardous. We will send you the current safety data sheets with classification, labelling and H and P phrases on request before you order. Supplied to trade and industrial users only.
Downloads
Technical Details
| Operating Conditions: | Durable, For indoor use, For outdoor areas, For production environments, For warehouse |
|---|---|
| Sectors/Industry: | Building & Facility Management, Industry & Production, Logistics & Warehousing, Maintenance & Technical Services, Municipalities & Public Institutions, Road & Rail Construction, Traffic Safety |
Login
Stock & Custom Solutions
Standard range from stock plus made-to-order solutions to your specifications.
Personal Expert Consultation
Direct contact with our experts – we find the technical solution for your problem.
Brand Quality
Products from renowned manufacturers – certificates and declarations of conformity per product on request.
Delivery DE & Nordics
Reliable delivery to Germany, Denmark, Norway, Sweden and Finland – Austria and Switzerland on request.
Our Bestsellers
The best-selling products for professional users.
About Hansehandel
What we at HANSEHANDEL, our products and solutions stand for
Our
Mission
Our mission is to make industrial procurement for our partners in Germany and Northern Europe as efficient and reliable as possible. We deliver not just products, but engineering expertise and dependable, personal support.
Our
Vision
We aim to be the agile partner for MRO solutions for companies in Scandinavia and Germany – with technical know-how, deep market understanding and a clear focus on industrial safety.
Frequently Asked Questions
Contact Us
We look forward to your technical challenge.
