WATCO Concrex Cold Set – epoxy repair mortar for low temperatures
€210.39
Product information "WATCO Concrex Cold Set – epoxy repair mortar for low temperatures"
Concrex Cold Set is WATCO's epoxy repair mortar for floor damage that has to be fixed in the cold. According to the manufacturer it cures at floor temperatures down to 0 °C, so holes, breakouts and broken joints in cold stores, unheated warehouses or outdoor areas can be repaired all year round without waiting for warmer weather.
The formula contains novolac resin, which the manufacturer says gives improved resistance to chemicals, solvents and temperature changes. Thanks to its high resin content, the mortar can be feather-edged and used up to 50 mm thick. It cures granite-hard, waterproof and non-dusting and bonds to concrete, metal, brick and masonry.
Typical applications
- Chillers, cold stores and unheated buildings
- Holes, breakouts and steps indoors and outdoors
- Broken expansion joints, shallow ramps, rail fixings
Features
- Cures from 0 °C floor temperature (manufacturer data)
- Novolac epoxy with high chemical and solvent resistance
- Slip resistance class R12 (manufacturer data)
- Suitable for heavy loads, can be feather-edged
Technical data (manufacturer)
| Base | 2-pack epoxy (novolac) with aggregate |
|---|---|
| Substrates | Concrete, metal, brick, masonry |
| Coverage | approx. 1.2 m² per 10 kg at 5 mm |
| Thickness | feather edge up to 50 mm |
| Cure time | 24 hours at 0 °C; 3–6 h at room temperature, heavy traffic after 8–12 h |
| Min. floor temperature | 0 °C |
| Use | Indoors and outdoors |
| Primer | bonding primer recommended for feather edges below 5 mm |
| Storage | 10–30 °C, frost-free; 12 months unopened |
Sold in the UK as Concrex Cold Set. For coloured floors, see Concrex Color Cold Set; for frost down to −20 °C, Concrex Sub Zero.
Versions
| Container | Manufacturer part no. |
|---|---|
| 10 kg | CXCS10 |
| 25 kg | CXCS25 |
Hazard information under CLP (according to the manufacturer's safety data sheet)
Component: Resin
Signal word: Warning
Hazard statements: H315 Causes skin irritation. H317 May cause an allergic skin reaction. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements: P280 Wear protective gloves. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental information: EUH205 Contains epoxy constituents. May produce an allergic reaction.
Component: Curing agent
Signal word: Danger
Hazard statements: H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H332 Harmful if inhaled. H361 Suspected of damaging fertility or the unborn child. H372 Causes damage to organs through prolonged or repeated exposure. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements: P201 Obtain special instructions before use. P280 Wear protective gloves, protective clothing and eye protection or face protection. P271 Use only outdoors or in a well-ventilated area. P260 Do not breathe vapour. P308+P313 IF exposed or concerned: Get medical advice/attention. P301+P310, P330, P331 IF SWALLOWED: Immediately call a POISON CENTER or doctor. Rinse mouth. Do NOT induce vomiting. P303+P361+P353, P310 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Immediately call a POISON CENTER or doctor. P305+P351+P338, P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. P405 Store locked up. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Wording of the H, P and EUH statements as per CLP Regulation (EC) No 1272/2008, Annexes III and IV; pictograms derived from the classification. The manufacturer's label and current safety data sheet are authoritative.
Note: The components may be classified as hazardous. We will send you the current safety data sheets with classification, labelling and H and P phrases on request before you order. Supplied to trade and industrial users only.
Downloads
Technical Details
| Operating Conditions: | Abrasion-resistant, Chemical resistant, Cold-resistant, Cold environment, Durable, For indoor use, For outdoor areas, For production environments, For warehouse, Slip-resistant, Solvent resistant |
|---|---|
| Sectors/Industry: | Building & Facility Management, Construction & Renovation, Food & Beverages, Industry & Production, Logistics & Warehousing, Maintenance & Technical Services |
Login
Stock & Custom Solutions
Standard range from stock plus made-to-order solutions to your specifications.
Personal Expert Consultation
Direct contact with our experts – we find the technical solution for your problem.
Brand Quality
Products from renowned manufacturers – certificates and declarations of conformity per product on request.
Delivery DE & Nordics
Reliable delivery to Germany, Denmark, Norway, Sweden and Finland – Austria and Switzerland on request.
Our Bestsellers
The best-selling products for professional users.
About Hansehandel
What we at HANSEHANDEL, our products and solutions stand for
Our
Mission
Our mission is to make industrial procurement for our partners in Germany and Northern Europe as efficient and reliable as possible. We deliver not just products, but engineering expertise and dependable, personal support.
Our
Vision
We aim to be the agile partner for MRO solutions for companies in Scandinavia and Germany – with technical know-how, deep market understanding and a clear focus on industrial safety.
Frequently Asked Questions
Contact Us
We look forward to your technical challenge.
