WATCO Concrex Color Cold Set – coloured epoxy repair mortar for low temperatures
€444.16
Product information "WATCO Concrex Color Cold Set – coloured epoxy repair mortar for low temperatures"
Concrex Color Cold Set is WATCO's coloured epoxy repair mortar for jobs that cannot wait until spring. According to the manufacturer it cures at temperatures as low as 0 °C, so holes, breakouts and joint damage in unheated buildings, cold stores or outdoor areas can be repaired permanently in winter – in a colour that matches the existing floor.
The high resin content gives good adhesion and allows thin feather edges as well as layers up to 50 mm. Once cured, the repair is granite-hard, waterproof, non-dusting and chemical resistant. Suitable for concrete, metal, brick and masonry.
Typical applications
- Holes and breakouts in coloured concrete floors in unheated buildings
- Cold rooms and chilled areas
- Damaged steps and broken expansion joints outdoors
Features
- Cures from 0 °C floor temperature (manufacturer data)
- Six colours: light grey, black, blue, green, tile red, buff
- Slip resistance class R12 (manufacturer data)
- Suitable for heavy-duty areas, can be feather-edged
Technical data (manufacturer)
| Base | 2-pack epoxy with aggregate |
|---|---|
| Substrates | Concrete, metal, brick, masonry |
| Coverage | approx. 1.2 m² per 10 kg at 5 mm |
| Thickness | feather edge up to 50 mm |
| Cure time | 8 hours at 10 °C, 48 hours at 0 °C |
| Application temperature | 0 °C to 30 °C |
| Use | Indoors and outdoors |
| Storage | 10–30 °C, frost-free; 12 months unopened |
Sold in the UK as Concrex Colours Cold Set. At normal room temperatures, the standard Concrex Color is the right choice.
Versions
| Colour | Container | Manufacturer part no. |
|---|---|---|
| Light grey | 10 kg | CXCCLGY10 |
| Light grey | 25 kg | CXCCLGY25 |
| Black | 10 kg | CXCCBLK10 |
| Black | 25 kg | CXCCBLK25 |
| Blue | 10 kg | CXCCBLU10 |
| Blue | 25 kg | CXCCBLU25 |
| Green | 10 kg | CXCCGRN10 |
| Green | 25 kg | CXCCGRN25 |
| Tile red | 10 kg | CXCCTRD10 |
| Tile red | 25 kg | CXCCTRD25 |
| Sand | 10 kg | CXCCBUF10 |
| Sand | 25 kg | CXCCBUF25 |
Hazard information under CLP (according to the manufacturer's safety data sheet)
Component: Resin
Signal word: Warning
Hazard statements: H315 Causes skin irritation. H317 May cause an allergic skin reaction. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements: P280 Wear protective gloves. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental information: EUH205 Contains epoxy constituents. May produce an allergic reaction.
Component: Curing agent
Signal word: Danger
Hazard statements: H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H410 Very toxic to aquatic life with long lasting effects.
Precautionary statements: P280 Wear protective gloves, protective clothing and eye protection or face protection. P273 Avoid release to the environment. P391 Collect spillage. P301+P310, P330, P331 IF SWALLOWED: Immediately call a POISON CENTER or doctor. Rinse mouth. Do NOT induce vomiting. P303+P361+P353, P310 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Immediately call a POISON CENTER or doctor. P305+P351+P338, P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. P405 Store locked up. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Wording of the H, P and EUH statements as per CLP Regulation (EC) No 1272/2008, Annexes III and IV; pictograms derived from the classification. The manufacturer's label and current safety data sheet are authoritative.
Note: The components may be classified as hazardous. We will send you the current safety data sheets with classification, labelling and H and P phrases on request before you order. Supplied to trade and industrial users only.
Downloads
Technical Details
| Operating Conditions: | Abrasion-resistant, Chemical resistant, Cold-resistant, Cold environment, Durable, For indoor use, For outdoor areas, For production environments, For warehouse, Slip-resistant |
|---|---|
| Sectors/Industry: | Building & Facility Management, Construction & Renovation, Food & Beverages, Industry & Production, Logistics & Warehousing, Maintenance & Technical Services |
Login
Stock & Custom Solutions
Standard range from stock plus made-to-order solutions to your specifications.
Personal Expert Consultation
Direct contact with our experts – we find the technical solution for your problem.
Brand Quality
Products from renowned manufacturers – certificates and declarations of conformity per product on request.
Delivery DE & Nordics
Reliable delivery to Germany, Denmark, Norway, Sweden and Finland – Austria and Switzerland on request.
Our Bestsellers
The best-selling products for professional users.
About Hansehandel
What we at HANSEHANDEL, our products and solutions stand for
Our
Mission
Our mission is to make industrial procurement for our partners in Germany and Northern Europe as efficient and reliable as possible. We deliver not just products, but engineering expertise and dependable, personal support.
Our
Vision
We aim to be the agile partner for MRO solutions for companies in Scandinavia and Germany – with technical know-how, deep market understanding and a clear focus on industrial safety.
Frequently Asked Questions
Contact Us
We look forward to your technical challenge.
