WATCO Concrex Color – coloured epoxy repair mortar
€393.72
Product information "WATCO Concrex Color – coloured epoxy repair mortar"
Concrex Color is WATCO's coloured epoxy repair mortar for coated or coloured floors. When you patch holes and breakouts in a grey, green or red factory floor, there is no need to paint over the repair afterwards – the mortar comes pre-coloured in six shades and blends in with the existing surface.
Technically it is the familiar Concrex: 2-pack, curing granite-hard, impervious and non-dusting. It can be feather-edged and, according to the manufacturer, is suitable for heavy traffic. It bonds to concrete, metal, brick and masonry.
Typical applications
- Breakouts in coloured warehouse and factory floors
- Steps and ramps with colour marking
- Coloured thin screed on traffic areas
Features
- Available in light grey, black, blue, green, tile red and buff
- Slip resistance class R12 (manufacturer data)
- Chemical resistant, impervious, non-dusting
- Can be feather-edged, no painting needed
Technical data (manufacturer)
| Base | 2-pack epoxy with aggregate |
|---|---|
| Substrates | Concrete, metal, brick, masonry |
| Coverage | approx. 1.2 m² per 10 kg at 5 mm |
| Cure time | 8 hours at 20 °C; light traffic after 5–6 h, heavy traffic after 12–16 h (15–20 °C) |
| Application temperature | 10 °C to 30 °C |
| Use | Indoors and outdoors |
| Storage | 10–30 °C, frost-free; 12 months unopened |
Sold in the UK as Concrex Colours. For cold conditions, Concrex Color is also available as a Cold Set version that cures from 0 °C.
Versions
| Colour | Container | Manufacturer part no. |
|---|---|---|
| Light grey | 10 kg | CXLGY10 |
| Light grey | 25 kg | CXLGY25 |
| Black | 10 kg | CXBLK10 |
| Black | 25 kg | CXBLK25 |
| Blue | 10 kg | CXBLU10 |
| Blue | 25 kg | CXBLU25 |
| Green | 10 kg | CXGRN10 |
| Green | 25 kg | CXGRN25 |
| Tile red | 10 kg | CXTRD10 |
| Tile red | 25 kg | CXTRD25 |
| Sand | 10 kg | CXBUF10 |
| Sand | 25 kg | CXBUF25 |
Hazard information under CLP (according to the manufacturer's safety data sheet)
Component: Resin
Signal word: Warning
Hazard statements: H315 Causes skin irritation. H317 May cause an allergic skin reaction. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements: P280 Wear protective gloves. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental information: EUH205 Contains epoxy constituents. May produce an allergic reaction.
Component: Curing agent
Signal word: Danger
Hazard statements: H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H411 Toxic to aquatic life with long lasting effects.
Precautionary statements: P280 Wear protective gloves, protective clothing and eye protection or face protection. P273 Avoid release to the environment. P391 Collect spillage. P301+P310, P330, P331 IF SWALLOWED: Immediately call a POISON CENTER or doctor. Rinse mouth. Do NOT induce vomiting. P303+P361+P353, P310 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Immediately call a POISON CENTER or doctor. P305+P351+P338, P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. P405 Store locked up.
Wording of the H, P and EUH statements as per CLP Regulation (EC) No 1272/2008, Annexes III and IV; pictograms derived from the classification. The manufacturer's label and current safety data sheet are authoritative.
Note: The components may be classified as hazardous. We will send you the current safety data sheets with classification, labelling and H and P phrases on request before you order. Supplied to trade and industrial users only.
Downloads
Technical Details
| Operating Conditions: | Abrasion-resistant, Chemical resistant, Durable, For indoor use, For outdoor areas, For production environments, For warehouse, For workshops, Slip-resistant |
|---|---|
| Sectors/Industry: | Building & Facility Management, Construction & Renovation, Industry & Production, Logistics & Warehousing, Maintenance & Technical Services, Retail & Hospitality |
Login
Stock & Custom Solutions
Standard range from stock plus made-to-order solutions to your specifications.
Personal Expert Consultation
Direct contact with our experts – we find the technical solution for your problem.
Brand Quality
Products from renowned manufacturers – certificates and declarations of conformity per product on request.
Delivery DE & Nordics
Reliable delivery to Germany, Denmark, Norway, Sweden and Finland – Austria and Switzerland on request.
Our Bestsellers
The best-selling products for professional users.
About Hansehandel
What we at HANSEHANDEL, our products and solutions stand for
Our
Mission
Our mission is to make industrial procurement for our partners in Germany and Northern Europe as efficient and reliable as possible. We deliver not just products, but engineering expertise and dependable, personal support.
Our
Vision
We aim to be the agile partner for MRO solutions for companies in Scandinavia and Germany – with technical know-how, deep market understanding and a clear focus on industrial safety.
Frequently Asked Questions
Contact Us
We look forward to your technical challenge.
