WATCO Epoxygrip – coarse-textured anti-slip epoxy coating
€238.52
Product information "WATCO Epoxygrip – coarse-textured anti-slip epoxy coating"
Epoxygrip (sold in the UK as Safety Grip) is WATCO's best-selling anti-slip coating and the classic solution wherever staff could slip on wet or oily floors: around machinery, on ramps, stairs and loading bays. A single high-build coat with coarse aggregate is enough to noticeably reduce the slip risk.
The solvent-free 2-pack epoxy with 100% solids is supplied with resin, hardener and a separate anti-slip aggregate, and bonds without primer to concrete, stone, steel, wood and asphalt that is at least three months old. In the pendulum test to BS 7976-2 Epoxygrip achieves a PTV of 78.2 according to the manufacturer, with cross-cut adhesion class 0 to ISO 2409. The cured surface resists common acids, alkalis, petrol and oils (manufacturer data).
Typical applications
- Wet or oily areas around machinery
- Steps, ramps, footbridges and loading bays
- Walkways, entrances and car parks
Features
- Coarse-textured, gloss anti-slip finish
- PTV 78.2 to BS 7976-2 (manufacturer data)
- Taber abrasion 163 mg to ISO 5470-1 (manufacturer data)
- One coat, no primer needed
- Further RAL colours on request (over 150 per manufacturer)
Technical data (manufacturer)
| Base | 2-pack epoxy, 100% solids, with anti-slip aggregate |
|---|---|
| Substrates | Concrete, stone, steel, wood, asphalt (min. 3 months old) |
| Pack size | 2.5 l, covers approx. 5 m² |
| Recommended coats | 1 |
| Film thickness | 320 µm |
| Cure time | 16 hours at 20 °C |
| Min. floor temperature | 15 °C |
| Use | Indoors and outdoors |
| Primer | Not required |
| Shelf life | 24 months unopened, keep frost-free |
For cold areas from 0 °C there is Epoxygrip Cold Cure, and for vibrating substrates the flexible Flexi-Grip version.
The slip resistance rating is manufacturer data from a standardised test method. Whether the surface is sufficient for your specific work area depends on contamination, moisture and use, and should be assessed as part of your risk assessment.
Versions
| Colour | Container | Manufacturer part no. |
|---|---|---|
| Black | 2.5 l | SGBLK |
| Light grey | 2.5 l | SGLG |
| Grey | 2.5 l | SGMGY |
| Tile red | 2.5 l | SGTRD |
| Safety blue | 2.5 l | SGSBL |
| Safety green | 2.5 l | SGSGN |
| Safety yellow | 2.5 l | SGSYE |
| Sand | 2.5 l | SGBUF |
Hazard information under CLP (according to the manufacturer's safety data sheet)
Component: Resin
Signal word: Warning
Hazard statements: H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects.
Precautionary statements: P280 Wear protective gloves. Wear eye protection or face protection. P273 Avoid release to the environment. P391 Collect spillage. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental information: EUH205 Contains epoxy constituents. May produce an allergic reaction.
Component: Curing agent
Signal word: Danger
Hazard statements: H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H317 May cause an allergic skin reaction. H373 May cause damage to organs through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects.
Precautionary statements: P280 Wear protective gloves, protective clothing and eye protection or face protection. P273 Avoid release to the environment. P260 Do not breathe vapour. P391 Collect spillage. P301+P310, P330, P331 IF SWALLOWED: Immediately call a POISON CENTER or doctor. Rinse mouth. Do NOT induce vomiting. P303+P361+P353, P310 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. Immediately call a POISON CENTER or doctor. P305+P351+P338, P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. P405 Store locked up. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental information: EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Component: Aggregate
Not classified as hazardous.
Supplemental information: EUH210 Safety data sheet available on request. EUH212 Warning! Hazardous respirable dust may be formed when used. Do not breathe dust.
Wording of the H, P and EUH statements as per CLP Regulation (EC) No 1272/2008, Annexes III and IV; pictograms derived from the classification. The manufacturer's label and current safety data sheet are authoritative.
Note: The components may be classified as hazardous. We will send you the current safety data sheets with classification, labelling and H and P phrases on request before you order. Supplied to trade and industrial users only.
Downloads
Technical Details
| Operating Conditions: | Abrasion-resistant, Acid and alkali resistant, Chemical resistant, For indoor use, For outdoor areas, For production environments, For warehouse, For workshops, Oil-resistant, Slip-resistant, Wet conditions and rain |
|---|---|
| Sectors/Industry: | Automotive & Suppliers, Building & Facility Management, Industry & Production, Logistics & Warehousing, Maintenance & Technical Services, Trades & Workshops |
Login
Stock & Custom Solutions
Standard range from stock plus made-to-order solutions to your specifications.
Personal Expert Consultation
Direct contact with our experts – we find the technical solution for your problem.
Brand Quality
Products from renowned manufacturers – certificates and declarations of conformity per product on request.
Delivery DE & Nordics
Reliable delivery to Germany, Denmark, Norway, Sweden and Finland – Austria and Switzerland on request.
Our Bestsellers
The best-selling products for professional users.
About Hansehandel
What we at HANSEHANDEL, our products and solutions stand for
Our
Mission
Our mission is to make industrial procurement for our partners in Germany and Northern Europe as efficient and reliable as possible. We deliver not just products, but engineering expertise and dependable, personal support.
Our
Vision
We aim to be the agile partner for MRO solutions for companies in Scandinavia and Germany – with technical know-how, deep market understanding and a clear focus on industrial safety.
Frequently Asked Questions
Contact Us
We look forward to your technical challenge.
