WATCO Express Coating Anti-Slip – fast-curing polyaspartic floor coating
€285.08
Product information "WATCO Express Coating Anti-Slip – fast-curing polyaspartic floor coating"
Express Coating Anti-Slip (sold in the UK as Fastcoat Anti Slip) is meant for sites that want to prepare and coat a slip-resistant floor within a single working day. It is based on a two-component polyaspartic resin: according to the manufacturer, the second coat can follow after about 4 hours at 20 °C, with light traffic possible after around 6 hours.
A major advantage over epoxy is the temperature window: it can be applied between −10 °C and +25 °C, indoors and outdoors. The coating is UV and weather resistant and bonds to concrete, old asphalt, sound existing coatings, wood and some metals. The anti-slip aggregate is supplied separately and added during mixing. A primer (e.g. Express Primer) is required.
Typical applications
- Production and storage areas with short shutdown windows
- Ramps, loading bays and outdoor areas
- Unheated buildings in the cold season
Features
- Two coats possible in one day
- Wet pendulum value (PTV) 66.8 to BS 7976-2 (manufacturer data)
- Cross-cut class 0, Wolff-Wilborn hardness 7H (manufacturer data)
- Application from −10 °C to +25 °C
- UV and weather resistant
Technical data (manufacturer)
| Base | 2-pack polyaspartic resin |
|---|---|
| Substrates | Concrete, old asphalt, well-bonded coatings, some metals, wood |
| Coverage | approx. 25 m² per 2.5 l per coat |
| Recommended coats | 2 |
| Film thickness | 85 µm dry (100 µm wet) |
| Cure time | 6 hours at 20 °C |
| Min. floor temperature | −10 °C |
| Pot life | approx. 25 min at 15 °C |
| Use | Indoors and outdoors |
| Primer | Required |
| Shelf life | 12 months unopened |
Express Coating is also available without anti-slip aggregate as a smooth version.
The slip resistance rating is manufacturer data from a standardised test method. Whether the surface is sufficient for your specific work area depends on contamination, moisture and use, and should be assessed as part of your risk assessment.
Versions
| Colour | Container | Manufacturer part no. |
|---|---|---|
| Light grey | 2.5 l | FCTASLGRY2 |
| Grey | 2.5 l | FCTASMGRY2 |
| Blue | 2.5 l | FCTASMBLU2 |
| Tile red | 2.5 l | FCTASTRD2 |
| Safety yellow | 2.5 l | FCTASSYL2 |
| White | 2.5 l | FCTASWHI2 |
Hazard information under CLP (according to the manufacturer's safety data sheet)
Component: Resin
Signal word: Warning
Hazard statements: H226 Flammable liquid and vapour. H317 May cause an allergic skin reaction. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements: P280 Wear protective gloves. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P403+P235 Store in a well-ventilated place. Keep cool. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental information: EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Component: Curing agent
Signal word: Warning
Hazard statements: H317 May cause an allergic skin reaction. H332 Harmful if inhaled. H335 May cause respiratory irritation.
Precautionary statements: P280 Wear protective gloves. P284 In case of inadequate ventilation wear respiratory protection. P271 Use only outdoors or in a well-ventilated area. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental information: EUH204 Contains isocyanates. May produce an allergic reaction.
Component: Aggregate
Not classified as hazardous.
Wording of the H, P and EUH statements as per CLP Regulation (EC) No 1272/2008, Annexes III and IV; pictograms derived from the classification. The manufacturer's label and current safety data sheet are authoritative.
Note: The components may be classified as hazardous. We will send you the current safety data sheets with classification, labelling and H and P phrases on request before you order. Supplied to trade and industrial users only.
Downloads
Technical Details
| Operating Conditions: | Abrasion-resistant, Cold-resistant, For indoor use, For outdoor areas, For production environments, For warehouse, Slip-resistant, UV-resistant, Weather-resistant |
|---|---|
| Sectors/Industry: | Building & Facility Management, Industry & Production, Logistics & Warehousing, Maintenance & Technical Services, Trades & Workshops |
Login
Stock & Custom Solutions
Standard range from stock plus made-to-order solutions to your specifications.
Personal Expert Consultation
Direct contact with our experts – we find the technical solution for your problem.
Brand Quality
Products from renowned manufacturers – certificates and declarations of conformity per product on request.
Delivery DE & Nordics
Reliable delivery to Germany, Denmark, Norway, Sweden and Finland – Austria and Switzerland on request.
Our Bestsellers
The best-selling products for professional users.
About Hansehandel
What we at HANSEHANDEL, our products and solutions stand for
Our
Mission
Our mission is to make industrial procurement for our partners in Germany and Northern Europe as efficient and reliable as possible. We deliver not just products, but engineering expertise and dependable, personal support.
Our
Vision
We aim to be the agile partner for MRO solutions for companies in Scandinavia and Germany – with technical know-how, deep market understanding and a clear focus on industrial safety.
Frequently Asked Questions
Contact Us
We look forward to your technical challenge.
