WATCO Flexi-Grip – flexible anti-slip polyaspartic coating
€285.08
Product information "WATCO Flexi-Grip – flexible anti-slip polyaspartic coating"
Flexi-Grip (sold in the UK as Safety Grip Flex) is a coarse-textured, flexible anti-slip coating from WATCO for places where rigid coatings tend to crack: steel or timber ramps, platforms and mezzanines, steps, or floors around vibrating machinery. A single coat gives a grippy surface there, even when it is wet or oily.
The polyaspartic system with about 85% solids consists of resin, hardener and separate anti-slip aggregate and is applied with a medium-pile roller or brush. It is suitable for concrete, well-bonded paint, stone, most metals as well as wood and older asphalt (at least 3 months old), indoors and outdoors. A primer is normally not required. Not suitable for new asphalt or galvanised surfaces.
Typical applications
- Ramps, steps, footbridges and walkways
- Mezzanines, platforms and balconies
- Loading bays, entrances and car parks
- Floors around vibrating machinery
Features
- Slip resistance R12 to DIN 51130 (manufacturer data)
- Very flexible: mandrel bend 8 mm to ISO 1519 (manufacturer data)
- Adhesion class 0 to ISO 2409, Taber abrasion 163 mg (manufacturer data)
- For wet and oily surfaces, indoors and outdoors
Technical data (manufacturer)
| Base | Polyaspartic, approx. 85% solids, with anti-slip aggregate |
|---|---|
| Components | Resin, hardener, aggregate |
| Substrates | Concrete, paint, stone, metal, wood, asphalt (min. 3 months old) |
| Coverage | approx. 5 m² per unit |
| Recommended coats | 1 |
| Film thickness | 250 µm |
| Cure time | 12 hours at 15 °C |
| Min. floor temperature | 15 °C |
| Pot life | 15 minutes at 25 °C |
| Use | Indoors and outdoors |
| Shelf life | 12 months unopened |
Tools are practically impossible to clean after use, so plan for them to be disposed of afterwards.
The slip resistance rating is manufacturer data from a standardised test method. Whether the surface is sufficient for your specific work area depends on contamination, moisture and use, and should be assessed as part of your risk assessment.
Versions
| Colour | Container | Manufacturer part no. |
|---|---|---|
| Grey | 2.5 l | SGRIPFLEXMGRY |
| Tile red | 2.5 l | SGRIPFLEXRED |
| Blue | 2.5 l | SGRIPFLEXBLU |
| Yellow | 2.5 l | SGRIPFLEXYEL |
| Light grey | 2.5 l | SGRIPFLEXLGRY |
| White | 2.5 l | SGRIPFLEXWHI |
Hazard information under CLP (according to the manufacturer's safety data sheet)
Component: Resin
Signal word: Warning
Hazard statements: H226 Flammable liquid and vapour. H317 May cause an allergic skin reaction. H412 Harmful to aquatic life with long lasting effects.
Precautionary statements: P280 Wear protective gloves. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P403+P235 Store in a well-ventilated place. Keep cool. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental information: EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Component: Curing agent
Signal word: Warning
Hazard statements: H317 May cause an allergic skin reaction. H332 Harmful if inhaled. H335 May cause respiratory irritation.
Precautionary statements: P280 Wear protective gloves. P284 In case of inadequate ventilation wear respiratory protection. P271 Use only outdoors or in a well-ventilated area. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.
Supplemental information: EUH204 Contains isocyanates. May produce an allergic reaction.
Component: Aggregate
Not classified as hazardous.
Supplemental information: EUH210 Safety data sheet available on request. EUH212 Warning! Hazardous respirable dust may be formed when used. Do not breathe dust.
Wording of the H, P and EUH statements as per CLP Regulation (EC) No 1272/2008, Annexes III and IV; pictograms derived from the classification. The manufacturer's label and current safety data sheet are authoritative.
Note: The components may be classified as hazardous. We will send you the current safety data sheets with classification, labelling and H and P phrases on request before you order. Supplied to trade and industrial users only.
Downloads
Technical Details
| Operating Conditions: | Abrasion-resistant, Chemical resistant, For indoor use, For outdoor areas, For production environments, For warehouse, Slip-resistant, Vibration-resistant, Wet conditions and rain |
|---|---|
| Sectors/Industry: | Building & Facility Management, Industry & Production, Logistics & Warehousing, Maintenance & Technical Services, Municipalities & Public Institutions, Ports, Shipbuilding & Offshore |
Login
Stock & Custom Solutions
Standard range from stock plus made-to-order solutions to your specifications.
Personal Expert Consultation
Direct contact with our experts – we find the technical solution for your problem.
Brand Quality
Products from renowned manufacturers – certificates and declarations of conformity per product on request.
Delivery DE & Nordics
Reliable delivery to Germany, Denmark, Norway, Sweden and Finland – Austria and Switzerland on request.
Our Bestsellers
The best-selling products for professional users.
About Hansehandel
What we at HANSEHANDEL, our products and solutions stand for
Our
Mission
Our mission is to make industrial procurement for our partners in Germany and Northern Europe as efficient and reliable as possible. We deliver not just products, but engineering expertise and dependable, personal support.
Our
Vision
We aim to be the agile partner for MRO solutions for companies in Scandinavia and Germany – with technical know-how, deep market understanding and a clear focus on industrial safety.
Frequently Asked Questions
Contact Us
We look forward to your technical challenge.
